Building my own star ship
- Thread starter Johnny
- Start date
You’re... you’re modeling the inside of the ship?
You’re mad. Absolutely certifiable!
My kind of people.
Incredible work.
Ta! Slow and steadily descending in to madness...
Internal layout for the crew quarters. I should really find another colour than brown, even if it is just for a basic look! XD
- How about a nice, calming teal or turquoise (with brushed gold highlights)? Or, for those crewman who can relax no matter their surroundings, a burnt orange (and bronze)?
Your ship - and the work you're putting into making it "real" - is amazing!
- How about a nice, calming teal or turquoise (with brushed gold highlights)? Or, for those crewman who can relax no matter their surroundings, a burnt orange (and bronze)?
Your ship - and the work you're putting into making it "real" - is amazing!
Hmm, gold trim could work, although I'd work it in sparingly for effect, and the teal/turquoise could work for medical areas? I'll look at adding the burnt orange in to (not sure what deck it is yet)-forward. I like the idea of that a lot.
For now I've been working on setting up the corridors sections in every orientation every four meters from the centre point of the saucer (straight through, t-junction, cross-corridor). Rather than parenting every item to a null object which makes 0,0 look like spaghetti, I use a single copy of the original object set in 1 collection, I then create a second block of collections for each of 4m differences. So when I use the collection as a linked object, the anchor point is always 0,0 but without all the mess of trying to parent multiple objects to one null. That probably makes no sense, but meh... here's some images!
This is the centre corridor section that I've replaced with the linked objects. The outer ones still have some work to do on them.
Also, I've done the two interlocking L-shape crew quarters and spread them around what I've now discovered will be deck 6!!
There's 24 two-bed crew quarters just in this one side.
I know that feeling all too well. Drafting a set of deck plans is an exercise in compromise. The set I made are only 2-D and black-&-white. As much as I'd love to convert them to 3-D, I'm not sure I have the skill-set to do so.Slow and steadily descending in to madness...
Great work! Keep at it.
Ugh can't find the jaw drop emoji
Great work!
Omg, it would have been so much easier just knocking it up in illustrator! XD But seriously, you should get a copy of blender and just try making the corridors, it's not as hard as you thinkg
Ugh can't find the jaw drop emoji
Great work!
This one works for me... 
I'm working on the transporter rooms, they're basic at the moment, but I've reserved the areas above and below the pads for some 'technical looking stuff' the would facilitate the operation of the tech.
I'm also going to use the area on the outer most side for accessing the upper and lower areas, but it may be for Jefferies tubes. While I'd love to reserve every 4x4m area just for them, I'm thinking I'll create the access points at that scale but then allow the tubes and vertical corridors to move through the ship without having to be constrained to that. Then they can fit in very small areas.
So I need to spend a week creating every variation of Jefferies tube block...
Love some legacy software!
I installed Windows 3.11 for Workgroups in VMWare just for the memories, so I get how you can stick to what works for you.Right, I've never embedded a video before but here goes. Where my corridors are built around 4x4m I've built the jefferies tube junctions as 3x3m. 4x4 just seemed so big, and 3x3 seemed better, but the ceiling height is defo a problem, but not one I think I can solve. With a 3m deck height and looking at the connection between the deck ladders can't be more than 50cm and everyone seems to do some ducking or other when in a junction, that leave us with 2.5m (at best), which leave 50cm left. So I just decided to make them as high as looks reasonable. It makes no sense otherwise.
Also I've built them as pizza slices roof, floor and side. So a side can be flat, a door, a ladder, a tube access etc. But I've kinda reached a problem which I think I've seen before. If I take up all the space that comes with a 4x4 block then I have a lot of wasted space. If it runs next to a door or wall then I have vertical space. I could look at building it in the the top corners of the corridors but then I don't think that will work completely. I could look at going up the corners of a turbolift square but it's a bit of a squeeze. If I don't want to waste a tonne of space then I have to build 'dog leg' sections that move the tubes to the size against a room or corridor. (I'm assuming this makes sense to you!) But even then I'll end up with vertical or horizontal waste.
But either way I'm kinda wasting a lot of space unless I find some clever way of routing the tubes... Not entirely sure what to do... :/
It's been ages since I posted, life got in the way. Go figure. 
While thinking about how to route the Jefferies tubes I've come to the conclusion that there's not much room for as many as I would assume. Same thing about the turbo lifts. So I'm going to look at a single or double loop in the same location on each deck depending on how large it is. It also keeps the junction rooms in the same place.
While thinking about how to route the Jefferies tubes I've come to the conclusion that there's not much room for as many as I would assume. Same thing about the turbo lifts. So I'm going to look at a single or double loop in the same location on each deck depending on how large it is. It also keeps the junction rooms in the same place.
Last edited:
This is... simply staggering!
Amazing work!
Amazing work!
Took the words right out of my mouth. Astounding undertaking.This is... simply staggering!
Amazing work!
This is... simply staggering!
I finally got a chance to go through this entire thread and WOW. That's some amazing stuff with the exterior and interior.
Thanks y'all.
I've broken down each of the tube junctions in to 9 sections including; ceiling with lights, ceiling with hole, wall with ladder, door, etc, each in four orientations and dynamically linked to the objects I'm setting up here. So I build a junction object by object and it doesn't take too long.
Oh come on... the Jefferies Tubes too?!
Get the net, boys...
Get the net, boys...
The detail stagers my mind! What kind of system are you running to work on what would be a huge file?
Erm... it's a 3ghz Core 2 Duo!
Trying desperately to run Ubuntu 20 with 6gb of ram. And a AMD Tahiti(?) Radeon 7950 or something, and I'm sure it's got a little graphics ram in there somewhere... 
Render times are terrible but building isn't too bad.I don't know if this is good or bad, but do these figures tell you anything?
And I've done a bit more now.
I love that all this fits in your ship. Fantastic.
Erm... it's a 3ghz Core 2 Duo!
I don't know if this is good or bad, but do these figures tell you anything?
That's pretty wild with that setup. I used to run with an AMD Radeon HD 5770 but a quadcore instead of a duo. If I'm reading your stats correctly, 511,649 triangles for all those rooms. I'm guessing the interiors are not high polygon count (and you're using materials to soften edges during rendering)? It looks pretty impressive.
