Star Trek: Starships Model/Magazine Subscription
- Thread starter trekker670
- Start date
for the starship blueprint/bts fans, MR is starting a new “Starship Briefing” series. The first one will be USS Athena, from the description, doesn’t appear to be a book but a portfolio with individual sheets.
www.masterreplicas.com
Star Trek Briefings: Jett Reno's Guide to the U.S.S. Athena
This is the first in a series of briefing packs that provide a unique insight into Star Trek ships. Jett Reno’s Guide to the U.S.S. Athena is an internal document that was created by the Star Trek: Starfleet Academy art department to provide the writers and directors with essential information...
www.masterreplicas.com
I've stopped collecting the models but these interest me. Hopefully there will be a healthy series of them.
Starship Library Series – U.S.S. Merced NCC 87075 Limited Edition
LIMITED EDITION • ONLY 500 PIECESThe U.S.S. Merced was a California-class starship that was transformed in a terraforming accident in 2381. While it was under the command of Captain Durango, the Merced was assigned to work with the U.S.S. Cerritos to recover an ancient generation ship...
www.masterreplicas.co.uk
Starship Library Series – U.S.S. Defiant NCC-74205
The U.S.S. Defiant NCC-74205 was Starfleet’s first true warship. It was originally developed to counter the threat from the Borg, but it was considered to be overpowered and unstable, so the project was abandoned. It was revived after Benjamin Sisko made first contact with the Dominion and...
www.masterreplicas.co.uk
The Defiant is issue 24... but where are issues 13, 14, 15, 20, 21, 22, and 23?
Also, they're still using that picture of the inaccurate season 6 CG model for the cover.
My Armstrong came today (along with the fixed Excelsior). Armstrong‘s base works much better than the previous 32nd century ship, but the nacelles are a little disappointing. The tops and bottoms of the nacelles are supposed to flare open a bit and reveal additional engine detail, but the way it’s executed it just looks like they weren’t glued together properly (as there’s a gap that lets you see assembly pegs inside the nacelle, like you would if they weren’t pushed down into place before the glue set). I sort of wonder if original there was to be a larger clear blue plastic piece that would have had the additional detail, filled the nacelle and hidden the pegs, but it got cost-cut along the way.
That being said, since this model is a Constitution class ship, I fully expect to see a USS Enterprise NCC-1701-whatever reuse of the mold eventually.
That being said, since this model is a Constitution class ship, I fully expect to see a USS Enterprise NCC-1701-whatever reuse of the mold eventually.
New Master Replicas newsletter came out today. Main Trek related things are the book about rebuilding the 1701-D bridge for PIC (maybe we talked about it before, but I’m not sure how they’re getting an entire “book” out of that topic, although maybe it’s one of those extended pamphlet “books” like comes with the library ships) and a light up MSD of the TOS Enterprise, which uses the Drexler cutaway from ENT. That saves me $125, as I’m not all that interested in a “TOS” thing from ENT. I was hoping they’d do the bridge turbolift alcove diagram, since that’s about the closest TOS actually got to an MSD. That diagram would have also been a nice companion piece for their bridge plaque.
Fanhome finally has the Excelsior up for individual order so I went ahead and grabbed it. I got the Drexler in right about a week so here’s hoping the same is set for Excelsior.
They also put up the listings for the Dresselhaus and Aledo. Cool to see the pictures. But the Aledo is probably the last one I buy.
Looks like they also added the JJ-prise and Delta Flyer to the re-release section.
They also put up the listings for the Dresselhaus and Aledo. Cool to see the pictures. But the Aledo is probably the last one I buy.
Looks like they also added the JJ-prise and Delta Flyer to the re-release section.
Is it the original Excelsior or the Greg Jein "Flashback" model with the narrow secondary hull?
Its the Excelsior II from Picard S2/3
I haven't seen pictures of the Fanhome re-release of the XL Excelsior yet, but so far I think they haven't made any changes to the Eaglemoss models. So it's still going to be the DS9 (CG) version, which seems to be mostly based on the VOY Flashback miniature except for the secondary hull being taller.
Unfortunately I still haven't received my Destiny. But, since the size of some other CG models from Stargate has recently been revealed:
Romulan D'deridex: 1353m / 1:10022
Asgard Beliskner: 1600m / 1:10738
Enterprise D: 641m / 1:4612
Asuran cruiser: 950m / 1:4460
People on the Facebook group are posting about receiving the Pathfinder-class USS Eaves and the {still a mystery}-class USS Dresselhaus. I’m excited for the Dresselhaus, it looks like a construction ship and workhorse. Until we get confirmation otherwise, I’m calling it the Bauhaus class.
I’m accumulating Kirk-class models! Goal is 4. Waiting for the sale on the website to get my fourth one.
I’m relabelling them first (except for one USS Armstrong), glue them to the stand, then break the stand’s stem off to make them swooshable. So far, it worked on two models.
Behold the USS Enterprise NCC-1701-P!
I’m accumulating Kirk-class models! Goal is 4. Waiting for the sale on the website to get my fourth one.
I’m relabelling them first (except for one USS Armstrong), glue them to the stand, then break the stand’s stem off to make them swooshable. So far, it worked on two models.
Behold the USS Enterprise NCC-1701-P!
Attachments
Same issue. Guess I won’t do a USS Noble conversion…
