• Welcome! The TrekBBS is the number one place to chat about Star Trek with like-minded fans.
    If you are not already a member then please register an account and join in the discussion!

Set blueprint exchange

I've been away longer than I intended. During my break, my other health problems deteriorated and I wasn't well enough to stay in touch. However I'm now back to state I was before I left and will now be resuming the Archive and the Voyager Project.

I've gone though the posts I missed and I think everything is now caught up on and added to the archive. If I've missed something, just let me know and I'll add it.
New to the archive is a Picard folder - http://archive.frogland.co.uk/#16073655574069

The Archive Update RSS feed: http://archive.frogland.co.uk/plugins/rss/

One of the posts that caught my attention was the research into the chairs - this has solved a lot of problems for the Voyager Project. I'm currently going through the manufacturers documents and 3D files with the aim of adding the information to the project.

Work on the Voyager project has resumed and the Standalone Junction Room has been completed and blueprinted.
[Image doesn't seem to want to display - so here is a link instead]
http://frogland.co.uk/redgeneral/forum_images/VOY_junction_standalone.png
Also the Set Dressing chapter has been updated.

With that there is a new release v4.0.0: https://www.deviantart.com/radishdalek/art/The-Voyager-Project-set-blueprints-680169230
There is a new numbering system: [Main release].[Sub Release].[Error Fixes]
* Main release - essentially when a room or equivalent is added
* Sub Release - when a console or room element (such as the transporter chamber) is added but the rest of the room isn't there yet.
* Error fixes - corrections etc.

The Galaxy and Runabout Projects are currently on hold as I'm avoiding spreading myself too far for now.
 
Welcome back man, it's been too long for sure! Hit me up if you need help with the Runabout project; I paused my model for the time being because, well, doing an interior from scratch is a pretty big leap. But with your plans and input, I should be able to get something done for release pretty soon!
 
Welcome back! And thank you for everything you do with the Archive.

In the voyager projects, for the Wedge, I think they may have used multiple different sizes of these. I stumbled upon an auction page that had one that appeared on the set. Of course I am struggling to find it now.

EDIT:
Here is one auction listing, but is not the one I was looking for:
http://startrekpropcollector.com/trekauctions/item.pl?i=6097
Here is another one but also was not the one that came to mind:
https://propstoreauction.com/view-auctions/catalog/id/106/lot/20168/
 
Last edited:
@Lt. Washburn - that is a great photo of the lights - I can see couple of details I missed and so will remodel to match.

@batboy853 - There may be three size variants of the wedges. I think the corridor alcove and standalone junction room used vacuum formed wedges, so they might match the panel in the propstore link.
 
 
A few more uploads

Side view of the TNG Conn position (photo of blueprint): http://archive.frogland.co.uk/#15444734874999/16094328872887

Thaw stasis chamber 1: http://archive.frogland.co.uk/#15415438100197/16094330228668
Thaw stasis chamber 2: http://archive.frogland.co.uk/#15415438100197/16094330230435

Although not a set plan, I felt this was too useful not to upload.
TOS dish construction blueprint by Matt Jefferies
http://archive.frogland.co.uk/#15444833631141/16094335846687
(Originally appeared in Star Trek Communicator #132)

Also, Happy New Year!
 
Wow, great timing. I've been doing some research on the conn/ops stations and had just gone looking for anything on them, including your repository. I remember seeing some blueprints years ago, a little small and blurry, but I couldn't find them. What was the source of that image?
 
It was on the twitter page for the TNG bridge restoration project, but it was a very early post - a lot of scrolling involved.

Also the TOS dish in Starfleet Communicator 132 was found in Internet Archive magazine section.
 
Also worth noting that the stasis chamber in the thaw ended up being re-used any time they needed a stasis chamber, such as in Resolutions, One, and Dragon's Teeth.

Also nice find on the conn / ops console!
 
The next version of the of the Voyager Project will have the corridor layout blueprinted. Hopefully it should be out before end of January.

WIP placeholders used to make sure that the corridor fits:
frogland.co.uk/redgeneral/forum_images/testA.png
[Edit: image changed to link as it won't display in forum]
testA.png
 
Looking forward to it! I still remember when Voyager first aired and I was trying to make sense of the corridor layout. I knew they were built from the TNG sets, but they were different enough to be confusing at first, the way they brought it down the side of engineering, instead of through the main area like TNG.
 
You must log in or register to reply here.

Similar threads

Starscape
Contest: ENTER December 2024 Art Challenge - Suggest Your Festive Themes!
Replies
6
Views
825
Starscape
Starscape
Starscape
  • Poll
Contest: VOTE December 2024 Art Challenge - Vote for Your Festive Theme!
Replies
5
Views
658
Starscape
Starscape
Starscape
Contest: ENTER March 2025 Art Challenge - Suggest Your Themes!
Replies
2
Views
444
Starscape
Starscape
Starscape
Contest: ENTER April 2025 Art Challenge - Suggest Your Themes!
Replies
2
Views
642
Starscape
Starscape
Starscape
Contest: ENTER February 2025 Art Challenge - Suggest Your Themes!
Replies
16
Views
1K
Starscape
Starscape
If you are not already a member then please register an account and join in the discussion!

Sign up / Register


Back
Top