Some new accessories from Master Replicas:
These "will ship before the end of the year"... so either they're being very optimistic or they're not talking about any particular year
Star Trek Desk Mat: U.S.S. Stargazer Conn Station
Turn your desk into the bridge of a starship with this extra large desk mat, thats designed to sit under your keyboard and mouse. The mat uses artwork created for the Conn station on the U.S.S. Stargazer in Season 2 of Star Trek: Picard. and it's almost impossible to resist tapping it as if you...
www.masterreplicas.co.uk
Star Trek Desk Mat: U.S.S. Enterprise NCC-1701-D Ops Station
Turn your desk into the bridge of a starship with this extra large desk mat, that's designed to sit under your keyboard and mouse. The mat uses artwork created for Data's Ops station on the U.S.S. Enterprise NCC-1701-D and it's hard to resist tapping it as if you were pressing the buttons. The...
www.masterreplicas.co.uk
Star Trek Desk Mat: The Original Series
Turn your desk into the bridge of a Constitution-class starship with this extra large desk mat, which is designed to sit under your keyboard and mouse. The artwork is taken directly from displays on the bridge of Captain Kirk's Enterprise as seen in the original series. The mat measures 31.25"...
www.masterreplicas.co.uk
These "will ship before the end of the year"... so either they're being very optimistic or they're not talking about any particular year
Last edited:
Those mats should be the keyboard and mouse.
I'll place them over the gauge cluster in my car to hide the CHECK ENGINE light instead.
I'll place them over the gauge cluster in my car to hide the CHECK ENGINE light instead.
Some new accessories from Master Replicas:
Star Trek Desk Mat: U.S.S. Stargazer Conn Station
Turn your desk into the bridge of a starship with this extra large desk mat, thats designed to sit under your keyboard and mouse. The mat uses artwork created for the Conn station on the U.S.S. Stargazer in Season 2 of Star Trek: Picard. and it's almost impossible to resist tapping it as if you...www.masterreplicas.co.ukStar Trek Desk Mat: U.S.S. Enterprise NCC-1701-D Ops Station
Turn your desk into the bridge of a starship with this extra large desk mat, that's designed to sit under your keyboard and mouse. The mat uses artwork created for Data's Ops station on the U.S.S. Enterprise NCC-1701-D and it's hard to resist tapping it as if you were pressing the buttons. The...www.masterreplicas.co.ukStar Trek Desk Mat: The Original Series
Turn your desk into the bridge of a Constitution-class starship with this extra large desk mat, which is designed to sit under your keyboard and mouse. The artwork is taken directly from displays on the bridge of Captain Kirk's Enterprise as seen in the original series. The mat measures 31.25"...www.masterreplicas.co.uk
These "will ship before the end of the year"... so either they're being very optimistic or they're not talking about any particular year
It's odd to me that they picked Stargazer instead of Titan-B or SNW 1701 - it's a cool ship, but it seems to me that the hero ship from a more beloved season/series would be a better seller.
They now show as in stock on the US website!
I was hoping they’d update the site images.
I ordered the SNW 1701, but preordered a couple other things at the same time, so I presume they won’t ship until all that stuff is in stock at the same time, so god knows when I’ll see it…
I do like Duderstat class! I’m heavily tempted now to pick that one up!
Unsure if has been posted previously, but some more pics of this up TrekCore:
https://blog.trekcore.com/2025/11/fanhome-star-trek-starships-winter-2025-reveals/
Got an update from MR on their action figures. Mariner is expected late Feb/early March ‘26 and Boimler in April ‘26. I would expect the Picard figures that were announced at the same time as those two have the same dates.
They did offer me 6 months of their collectors club for free as a “sorry for the delay” gift.
They did offer me 6 months of their collectors club for free as a “sorry for the delay” gift.
I got an update today that they’re shipping my SNW Enterprise because the other stuff from the same preorder probably won’t arrive until Q2 of next year.
I did not get a “sorry for the delay” gift - although maybe that will be the result when my other preorder that doesn’t have something they can ship immediately is also months past the due date.
I did not get a “sorry for the delay” gift - although maybe that will be the result when my other preorder that doesn’t have something they can ship immediately is also months past the due date.
If the same manufacturer in China now produces models for both Master Replicas and Fanhome, maybe they prefer working for Fanhome because they order larger quantities, pay more, pay faster, or something like that...
Edit: Actually, here's a new interview with Ben Robinson. Right in the beginning he talks about the delays a bit.
16-18 Star Trek action figures have been sculpted. When choosing ships for the Star Trek starships library, they're "leaving some space for the Fanhome ships, part of the understanding was that they would get a decent amount of time before there was a little version released." The Picard tea cups turned out to be hugely popular. Among the upcoming Stargate ships are the Al'kesh, Tel'tak, Orion, and Asgard O'Neill class. Destiny should ship early next year.
Last edited:
Two more of the starship library models that were first shown at SDCC are up for pre-order:
Starship Library: U.S.S. Voyager NCC-74656-J
The far-future U.S.S. Voyager-J — die-cast, with a 48-page collector book. Specifications Model length: approx. 4–5" (10–13 cm) Collector book: 48 pages Display: base included; book slides in to form the display Licence: officially licensed Star Trek collectible by Master Replicas
www.masterreplicas.co.uk
Starship Library: Klingon D7 Battle Cruiser (2250s)
The original 2250s D7 battle cruiser — die-cast, with a 48-page collector book. Specifications Model length: approx. 4–5" (10–13 cm) Collector book: 48 pages Display: base included; book slides in to form the display Licence: officially licensed Star Trek collectible by Master Replicas
www.masterreplicas.co.uk
I think the D7 makes sense as a companion for the SNW Enterprise, and because the Disco D7 hasn't been available for years (I think it was also one of the few ships that MR never stocked after Eaglemoss folded) but not sure why they'd do the Voyager-J, even though it's a nifty ship seems like there are others that should be ahead of it in line.Two more of the starship library models that were first shown at SDCC are up for pre-order:
Starship Library: U.S.S. Voyager NCC-74656-J
The far-future U.S.S. Voyager-J — die-cast, with a 48-page collector book. Specifications Model length: approx. 4–5" (10–13 cm) Collector book: 48 pages Display: base included; book slides in to form the display Licence: officially licensed Star Trek collectible by Master Replicaswww.masterreplicas.co.uk
Starship Library: Klingon D7 Battle Cruiser (2250s)
The original 2250s D7 battle cruiser — die-cast, with a 48-page collector book. Specifications Model length: approx. 4–5" (10–13 cm) Collector book: 48 pages Display: base included; book slides in to form the display Licence: officially licensed Star Trek collectible by Master Replicaswww.masterreplicas.co.uk
I think the Voyager J was one of the more popular ships from the ST Universe collection (and so far it's the only Master Replicas ship I'm even remotely interested in). I'd expect to see some more ships that were previously released as part of the Discovery/Universe line or as special editions (NX-01 refit, Beyond Enterprise, PIC season 1 Inquiry class?)
Since they've announced the Galaxy-class USS Odyssey, I wonder if they have acquired some of the old Eaglemoss molds as well and will re-release them with new names (Excelsior-class Hood and/or Lakota, Intrepid-class Bellerophon?)
But above all I'm hoping for larger versions of a few shuttlecraft (TOS Galileo, Type 9, Type 11, Workbee)!
I think these are new molds, i believe they're smaller and the way the J’s nacelles attach to the hull are different from the Eaglemoss version. The clear plastic linkers look like they’re attached instead of clip-on (i actually think directly attached looks better, i find the clip-on bits for the 31st century ships are too bulky and it isn't like i need them to actually come off). However, I wouldn't be surprised if MR has the original files used to generate the Eaglemoss molds and then just modified them accordingly.
Last edited:
Similar threads
