Well, thanks to that cutaway poster, as well as all the behind-the-scenes drawings, the refit is pretty well set, for better or worse.
The E-A, on the other hand, has a different engine layout (as evidenced by their using the E-D's engine room on screen), so the jury is still out on that one (despite the reuse of the cutaway poster in marketing). So, a shorter hangar bay, less cavernous interior, and proper slush tanks along the upper part of the secondary hull are certainly on the table.
Well, thanks to that cutaway poster, as well as all the behind-the-scenes drawings, the refit is pretty well set, for better or worse.
The E-A, on the other hand, has a different engine layout (as evidenced by their using the E-D's engine room on screen), so the jury is still out on that one (despite the reuse of the cutaway poster in marketing). So, a shorter hangar bay, less cavernous interior, and proper slush tanks along the upper part of the secondary hull are certainly on the table.
Well as far as reusing the sets from TNG ybroN Lenara has done a great job of redoing the 1701-A MSD
Yeah, that was COOL!!! I still have comics with that ad.I think I would've liked the "art" version seen in comic book ads prior to the movie. Not too far off from the TOS-E.
Ar-Pharazon, are you by any chance remembering this 1976 "The New Voyages"? (has a few good short stories)
http://memory-beta.wikia.com/wiki/Star_Trek:_The_New_Voyages
T'Girl, I tried a quick test of rotating the nacelles, but not sure that worked...
http://bloss1.home.comcast.net/pwpimages/Atest.jpg
To echo the original post, I think the TMP Enterprise is still the most credible, well-thought-out starship design in Trek or any other series, with relatively few interior/exterior conflicts (not zero, of course). That's probably why we can't resist messing with it...
So, I made some adjustments to my quad-Refit pic, hopefully now a bit less garish, less damaging to the original design. I narrowed the cross-strut, trimmed the aft fins, and tried a few nacelle locations...ending up about 1/2" from where I started. You can now just see where the strut / rear phototorp extends aft from deck L. And I fudged the NCC number to make clear this isn't the 1701...though I suppose it could be a refit of the 1701A...
![]()
(After monkeying with the TMP and with the 1701C, what other classic design should I screw up? Hmmm...)![]()
To echo the original post, I think the TMP Enterprise is still the most credible, well-thought-out starship design in Trek or any other series, with relatively few interior/exterior conflicts (not zero, of course). That's probably why we can't resist messing with it...
So, I made some adjustments to my quad-Refit pic, hopefully now a bit less garish, less damaging to the original design. I narrowed the cross-strut, trimmed the aft fins, and tried a few nacelle locations...ending up about 1/2" from where I started. You can now just see where the strut / rear phototorp extends aft from deck L. And I fudged the NCC number to make clear this isn't the 1701...though I suppose it could be a refit of the 1701A...
![]()
(After monkeying with the TMP and with the 1701C, what other classic design should I screw up? Hmmm...)![]()
Actually design wise the Galaxy is the best concieved ship structurally and concept wise. It's the most functional vessel.
When the TMP Enterprise was created they still didn't have a good idea how the warp drive and warp core worked. It introduced the idea of the super colider power plant but didn't do it correctly....
The Galaxy form wasn't just happenstance. The lowered nacelles were specifically positioned to clear the Saucer in the event of a aborted Saucer reintergration. The Saucer was shaped as an air foil for reentry. The design included escape pods for the first time and well place offensive weapons.
The manual is a good understanding of the design that ACTUALLY went into the ship but it stands as the best design ship in Trek History.
I rank them in this order.
Galaxy Class
Intrepid Class
Miranda
Excelsior Class
Enterprise Class (Constitution II)
Danube Runabout
While this is the top of the list...The bottom or the Very worse Designed ships in Star Trek are.
1. Worst design: Prometheus
2. Sovereign.
3. Defiant
I base these list on Primarily...The least contradictions in design. Best functional use of form. Best subsystem placement.
Prometheus is the worse because for all the warp cores it has no core ejection ports infact it has very few ports period, the worse subsystem placement and one of the worse offensive weapons placements.
The Enterprise & Excelsior Class ship had problems.
The core was laid along the spine of the ship making it an easy target.
Sovereign and Defiant have had numerous problems.
Sovereign had one of the worse weapon emplacements I've ever seen for a Role of it's type. The refit was sorely needed. The ship was never finished even after Nemesis.
While Defiant was well designed on the exterior...the interior design was poor...really poor as it is clear Defiant is not 120 meters or even 170 meters long but at the very least 203 meters long. There for the deck number iscompletely wrong. (There is no reason to have 2 to 3 decks worth of windows on the underside the underside of the ship if there are only four decks. Defiant is at least 7 to 8 decks. Comparable to the Miranda Class starship.
I'm inclined to disagree on the Enterprise, as it was designed during a period of trekdom when it was assumed that most weapons would slag an unshielded ship.
Really, armor and physical defenses are futile. That's why the bridge is on the outside, that's why there's big windows, that's why the umbilicals are uncovered, that's why the crew hatches don't have armor plating. It's also why the warp engines have exposed bits, why the impulse exhausts aren't armored as well.
If these ships were meant to partake in unshielded combat, all of Starfleet's ships would basically be different-sized versions of the Defiant. No dangly bits to "shoot off" and everything's covered under the hull, even the escape pods.
Question- Can you think of another sci-fi ship (of comparable screen time) with more interior-to-exterior design consistency than the TMP-E? It's engine core lines up with the impulse dome, the cargo/shuttle bay generally fits the outer hull shape, its large windows represent specific rooms, etc. The design was just comprehensive enough that nearly every set could convey an idea of its location in the ship.
The Galaxy design is one of the best, but its sheer size and the budget limits of television made it rare for any given interior shot to correspond to a definitive location within the hull... there was just no need to. Of course there are a few threads working on that...
Or even more realistically, pint-sized Death Star-shaped vehicles.If these ships were meant to partake in unshielded combat, all of Starfleet's ships would basically be different-sized versions of the Defiant.
Yeah, the Falcon wins the "I have got to get me one of these!" category. But I've seen at least three different interior layouts attempting to get the gunwell ladder to line up with the exterior turrets, and none of them got the angle of the ladder or the cockpit hallway quite in sync with the movie set. (And where was Lando's top hatch anyway?) Perhaps it was part TARDIS...![]()
Yeah, what's this 'get hit with full phasers while unshielded & take heavy damage' crap? Anyone remember M-5 and what it did to shielded starships???I'm inclined to disagree on the Enterprise, as it was designed during a period of trekdom when it was assumed that most weapons would slag an unshielded ship.
We use essential cookies to make this site work, and optional cookies to enhance your experience.