Uniform Differences

Discussion in 'Star Trek Movies: Kelvin Universe' started by EJD1984, Aug 12, 2008.

Thread Status:
Not open for further replies.
  1. Cary L. Brown

    Cary L. Brown Rear Admiral Rear Admiral

    Joined:
    Oct 14, 2005
    Location:
    Austin, Texas
    It does seem like, well... like a rather extravagant expense for something that the audience really couldn't give a flying @#$* about.

    It's really not all that common for a film production to commission their own fabric production facility with their own custom weaving mechanics. You can do this with molding, or embossing, easily enough... but not with fabric weaving.

    SO...

    1) Maybe they spend half of the movie's budget setting up a specialized textile manufacturing facility?

    2) Maybe they found a fabric already in production which has a "delta-shield-like" element in the weave already?

    3) Maybe the overshirts aren't made from any fabric in the sense we think of (ie, they're molded plastic)?

    4) Maybe the thing is simply photoshopped in, as is being proposed.

    I find #1 to be INCREDIBLY UNLIKELY. And #3 brings in a whole new set of problems to be dealth with (fabric is easy to work with and looks good... other materials, less o).

    So, for me, I tend to think that it's either #2, or #4. And if it's #2, that's just a case of dumb luck... of someone having stumbled upon this fabric.
     
  2. Admiral Buzzkill

    Admiral Buzzkill Fleet Admiral Admiral

    Joined:
    Mar 8, 2001
    :lol:

    It was done for "Spider-Man." It was done for "Superman Returns." And it was done for Abrams' "Star Trek."
     
  3. Jon1701

    Jon1701 Rear Admiral Rear Admiral

    Joined:
    Jun 24, 2005
    Location:
    Manchester, UK
    I suppose the only thing you could say for Spiderman, Superman et all is that they only had to make one outfit (although they probably made plenty of spares) as opposed the the hundreds they made this time out. I've no idea the costs involved in creating a delta shield-esqe fabric off the shelf. I assume its a relatively simple process but I honestly have no idea.

    I think we need a fabric expert. Do we have a fabric expert on the board? There's never a fabric expert when you need one.

    I can't believe I'm discussing fabric.
     
  4. Admiral Buzzkill

    Admiral Buzzkill Fleet Admiral Admiral

    Joined:
    Mar 8, 2001
    The likelihood of it is academic. The costumes are printed with the Starfleet chevron.
     
  5. Cary L. Brown

    Cary L. Brown Rear Admiral Rear Admiral

    Joined:
    Oct 14, 2005
    Location:
    Austin, Texas
    No, neither of the above created custom woven fabrics, and I'd be shocked if Abrams did it either.

    Both Spiderman and SR had RUBBER SUITS. Which, if you notice, I DID mention. But since I sincerely doubt that the clothes our stars will be wearing on-screen will be molded rubber (complete with "bat-nipples?") I doubt that this is relevant...

    Do you have reason to believe that the costumes being worn in this film will have that?

    Oh, and as for "Spiderman," I didn't notice any "little spider" in the weave of any fabric. I noticed big, embossed rubber stripes on it, but that's hardly the same thing. So we're limited to "Superman Returns." Which was a rubber muscle-suit, wasn't it?
     
  6. ManOnTheWave

    ManOnTheWave Vice Admiral Admiral

    Joined:
    Feb 10, 2005
    Location:
    ManOnTheWave
    http://www.usatoday.com/life/movies/news/2005-04-22-super-man_x.htm

    This article with the SR costume designer doesn't say anything about rubber suits, but does say they relied on Routh to fill out the suit with his body. It was material with sculpted rubber accents.

    "This first look at Superman Returns— due in theaters in June 2006 — shows that the skin-tight costume stretches over only the actor's muscles and frame, without the augmented armored pecs or abs of recent movie superheroes...."

    http://en.wikipedia.org/wiki/Spider-Man_2


    Spider Man had fake muscles, but they were still under cloth.
     
    Last edited: Aug 12, 2008
  7. Jon1701

    Jon1701 Rear Admiral Rear Admiral

    Joined:
    Jun 24, 2005
    Location:
    Manchester, UK
    Oh, I agree completely.

    The costumes are clearly printed with the chevron. Having said that, I would have thought something like that would have been cost prohibative, but the budget is...what, $120-150 million? You could buy a decent factory in india or china for that...

    :D
     
  8. Cary L. Brown

    Cary L. Brown Rear Admiral Rear Admiral

    Joined:
    Oct 14, 2005
    Location:
    Austin, Texas
    In order to create a new weave, you have to createa new weaving process and, in most cases, create new weaving machinery to produce it. And it's not a trivial task to come up with a weaving pattern.

    I've never dealt with this for clothing purposes, but I've dealt with composites using woven fabric meshes integrated into them. In these cases, it's critical to get the "weave" exactly right for mechanical purposes, as you can certainly guess.

    To create a new weaving process would probably run in the range of between 3 and 5 million dollars. Unless, as I said, they got lucky and found a fabric which already had the right shape in it already, purely by coincidence.

    Now, if the shirts are some form of polymer-blend (rayon/polyester, for instance) they could theoretically "iron in" the patterns... essentially, do a small local melt of the fabric fibers to give it a little "sheen" in various locations. This would be practical, but the fabric would be compromised in terms of its strength... meaning that the tunics would probably only last through three wearings (and washings) before they'd need replacement.

    But, again, the ONLY time this has ever been done in the past was with what were literally "rubber suits."

    Furthermore... think about it... who's going to NOTICE the little symbols in the fabric? If the audience is bored enough by the STORY to be paying attention to the FABRIC WEAVING... then as far as I'm concerned, this'll mean that we have a true BOMB on our hands.

    Only us... the "hardcore fans"... will even really care that the costumes are blue, red, and an earth-tone gold... and that's as it should be.

    If even the FANS give a flying @#$* about "little symbols" in the fabric... and worse yet, if the production team WANTS US to give a flying @#$* about that... the production is doomed! :vulcan:
     
  9. ManOnTheWave

    ManOnTheWave Vice Admiral Admiral

    Joined:
    Feb 10, 2005
    Location:
    ManOnTheWave
    I said it would be "Superman Returns lame" because Superman's suit in that film was made of little s's. As for why it would be lame, I don't see a military organization making it's uniforms out of it's symbol. It seems silly to me, like if the army made it camo patterns out of patriotic stars. I then go into a possible reason why it would thematically fit the costumes of TOS and be less silly.
     
  10. ManOnTheWave

    ManOnTheWave Vice Admiral Admiral

    Joined:
    Feb 10, 2005
    Location:
    ManOnTheWave
    It started with colors... moved on to fabric... and THEN...

    Edit: I was replying to jon... who is now posted after this one... and...


    head explodes
     
  11. Jon1701

    Jon1701 Rear Admiral Rear Admiral

    Joined:
    Jun 24, 2005
    Location:
    Manchester, UK
    I still can't believe we are discussing fabric. Fabric. Man, we are fucking nerds...

    :lol:
     
  12. Franklin

    Franklin Vice Admiral Admiral

    Joined:
    Aug 22, 2006
    Location:
    In the bleachers
    With computerized weaving and weaving pattern software out there, would creating a small and tight Starfleet shield pattern in fabric really be much more complicated than doing a fancy herringbone or hounds tooth pattern?
     
  13. Admiral Buzzkill

    Admiral Buzzkill Fleet Admiral Admiral

    Joined:
    Mar 8, 2001
    There's been a lot of innovation in textile weaving and printing technology. This is far from the first time this has been done for a movie - it's a cool thing, but not challenging from a technical or budget POV on a film of this scale.
     
  14. PowderedToastMan

    PowderedToastMan Commodore Commodore

    Joined:
    Mar 8, 2005
    We have actually known about the delta woven into ALL the uniforms for quite a while, it is just now that we can show it
     
  15. Michael

    Michael Good Bad Influence Moderator

    Joined:
    Jul 10, 2007
    Location:
    Aloha Quadrant
    :eek: You knew it all along?! And you didn't tell us? What kind of news site are you?





    Kust kidding, of course. ;)
     
  16. Gepard

    Gepard Vice Admiral Admiral

    Joined:
    Oct 20, 2007
    Indeed. Just as an example (Cary... ;) ), LucasFilm had custom patterned fabric woven for the Jedi robes in the prequel films. Some enterprising fans even joined forces and hired a company to recreate the weave for sale to other fans interested in making costumes; so it's clearly expensive, but not so much that it's beyond the reach of a movie studio, or even a few die-hard fans.
     
  17. PixelMagic

    PixelMagic Fleet Captain Fleet Captain

    Joined:
    Apr 3, 2008
    I don't think the delta shield is weaved into the fabric, it's probably silk screened on.
     
  18. Cary L. Brown

    Cary L. Brown Rear Admiral Rear Admiral

    Joined:
    Oct 14, 2005
    Location:
    Austin, Texas
    I read through the entire thread (as it was being written) which you refer to, and either I missed the post showing the shield-in-weaving or it wasn't really there...

    I remember that in the old board software it was quite easy to link to a specific post inside a specific thread. I haven't tried that since the change-over, but it seems likely that it wouldn't be much different... so perhaps you can link to the specific post?

    Also... why isn't this evident in the Quinto-as-Spock image? His costume's "over-shirt" looks, simply, like velour, doesn't it?

    http://www.trekmovie.com/images/trekmovieposter1.jpg
     
  19. Therin of Andor

    Therin of Andor Admiral Moderator

    Joined:
    Jun 30, 2004
    Location:
    New Therin Park, Andor (via Australia)
    Or lamé? :guffaw:
     
  20. shapeshifter

    shapeshifter Rear Admiral Rear Admiral

    Joined:
    Nov 16, 2007
    Location:
    Land of Illusion
    I too do not see the pattern on Spock's shirt and I am thinking it may be his shirt was not created by whoever created the Starfleet uniforms. I mean, (in story) the Vulcan's supply their own with custom uniforms which meet the special requirements (need to be warmer) for Vulcan's in the Fleet. Also, the use of patterned material, along with being "illogical" may inhibit the insulating quality of the material used but more likely - they just want to be different.
     
    Last edited: Aug 13, 2008
Thread Status:
Not open for further replies.