Valkyrie013's Random 3D interiors, exteriors, pretty women..
- Thread starter valkyrie013
- Start date
So.. its like watching Nascar... Another Left Turn!!
While looking for References for the Excelsior I found some concept art for the Disco, and thought, Hey! do a TOS version!
SO.. this is where I'm at at the moment. Still blocking things in, Bill's nacelles are placeholders... So.. more latter!
While looking for References for the Excelsior I found some concept art for the Disco, and thought, Hey! do a TOS version!
SO.. this is where I'm at at the moment. Still blocking things in, Bill's nacelles are placeholders... So.. more latter!
Nicely done
Some more progress.
Done work on the Warp engines, but still don't like the tail end, i'll work on that. Gave it a round shape, but some hints to the original discovery nacelle. Some details added. Next is some shield grids and some other details.
Done work on the Warp engines, but still don't like the tail end, i'll work on that. Gave it a round shape, but some hints to the original discovery nacelle. Some details added. Next is some shield grids and some other details.
i would love to see all these ship textured and large orthos made of them
Have worked on the Discovery, may do some renders today,
Took a bit of a left turn, and restarted on the Warp Delta from Enterprise. And I have to say, this one will take me.. Awhile.. Whomever done this one didn't skimp on the details.
Have all the big pieces blocked off and started detailing stuff like the Warp engines and the rear of the ship ( that wasn't fun)
SO more soon
Took a bit of a left turn, and restarted on the Warp Delta from Enterprise. And I have to say, this one will take me.. Awhile.. Whomever done this one didn't skimp on the details.
Have all the big pieces blocked off and started detailing stuff like the Warp engines and the rear of the ship ( that wasn't fun)
SO more soon
Update:
more work on the back rear stuff. I think I got it all, Haven't cut in some stuff, need to join it to the hull, it gets.. finiky.. Next is the bottom? Maybe Pylons.. we'll see
more work on the back rear stuff. I think I got it all, Haven't cut in some stuff, need to join it to the hull, it gets.. finiky.. Next is the bottom? Maybe Pylons.. we'll see
A bit more.
some of the do dads on the top, aft bridge.
Major work was the bottom, go that all gridded out.
There are some sensor pits, just textures on the model, have to figure out what goes in them.. hehe
More latter!
some of the do dads on the top, aft bridge.
Major work was the bottom, go that all gridded out.
There are some sensor pits, just textures on the model, have to figure out what goes in them.. hehe
More latter!
Okay, Another left Turn!
I'll come back to the Delta Soon.
Found an STO model of the Intrepid from Picard S3, and i LOVE this ship. so started to redo and detail the model.
Still not done, going to set it up for printing. add more detals, still got to install the windows.. he he..
so!
Design note.. weired that it has 8! forward facing torpedo tubes, 4 on the neck and 2 each side of the deflector.
I'll come back to the Delta Soon.
Found an STO model of the Intrepid from Picard S3, and i LOVE this ship. so started to redo and detail the model.
Still not done, going to set it up for printing. add more detals, still got to install the windows.. he he..
so!
Design note.. weired that it has 8! forward facing torpedo tubes, 4 on the neck and 2 each side of the deflector.
More details put in, Got some better renders of the filming "miniature" Kinda going with a mix of that and the STO version with a few extra details like a Rear torpedo tube, and rear phaser strips i'm keeping.
More soon!
More soon!
More!
Almost done.
Almost done.
Beautiful! Love that design.
Okay, Finished with the 3d Printing prep.
Made 2 verisons, the Doug/Sto version and the Screen version. The Screen doesn't have the 4 rear phaser strips or rear torpedos. and the parts for the back of the bridge saucer were deleted.
So, next stop printing to see if it came out, and maybe some textures.
sized it for 1/2500 that makes it 9 inches long.
Thanks!
Made 2 verisons, the Doug/Sto version and the Screen version. The Screen doesn't have the 4 rear phaser strips or rear torpedos. and the parts for the back of the bridge saucer were deleted.
So, next stop printing to see if it came out, and maybe some textures.
sized it for 1/2500 that makes it 9 inches long.
Thanks!
So.. Been a little while, been cleaning up a few models, but the next one I'll be spending time on is the Protostar.
Again, an STO model, its not bad, but needed alot of clean up, weirdly, and very happily, the STO model Includes the interior guts for the Proto Drive, so in the future will probably be a version with the Proto drive Deployed.. which will be interesting
Okay, where I'm at, Have all the STO Parts cleaned up, now i'm redoing most of the parts to be a bit smoother and add on the detail of the screen ship as the game had Textures for the panels.. so, lot of work ahead.
Again, an STO model, its not bad, but needed alot of clean up, weirdly, and very happily, the STO model Includes the interior guts for the Proto Drive, so in the future will probably be a version with the Proto drive Deployed.. which will be interesting
Okay, where I'm at, Have all the STO Parts cleaned up, now i'm redoing most of the parts to be a bit smoother and add on the detail of the screen ship as the game had Textures for the panels.. so, lot of work ahead.
Got my hands on the STO Discovery A model, so I switched over to that for now.
I've rebuilt some of the parts, and added the details the Texture would have done, like the numerous pill shapped pits. Also the "Aztec" on the spinning parts of the saucer.
Very nearly done, just have to figure out how I'm going to cut it up to print..
I've rebuilt some of the parts, and added the details the Texture would have done, like the numerous pill shapped pits. Also the "Aztec" on the spinning parts of the saucer.
Very nearly done, just have to figure out how I'm going to cut it up to print..
Mission module?
I had forgotten all about the TMP era Hornet.
Duderstat TOSOkay, Finished with the 3d Printing prep.
Made 2 verisons, the Doug/Sto version and the Screen version. The Screen doesn't have the 4 rear phaser strips or rear torpedos. and the parts for the back of the bridge saucer were deleted.
So, next stop printing to see if it came out, and maybe some textures.
sized it for 1/2500 that makes it 9 inches long.
Thanks!
I had forgotten all about the TMP era Hornet.
I've been on this board for over a decade, but rarely post. I gotta say, that design is beautiful.
What I like most is that it looks like something from between the late TOS era and the movie era. About the only thing I would change is the shape of the bussard collectors to look similar to that era. I like the shape but maybe a bit less of the angle on the domes.
This design also looks useful. The thing that bugs me about ships with cutouts is that it isn't a very useful. How do you get from the starboard end to the port end (without turbolifts since turbo lifts would be possible but difficult in the saucer)? You have to walk all the way around. Your ship solves that problem.
Absolutely gorgeous. Can't wait to see more!
Last edited:
