Set blueprint exchange

batboy853 · Feb 19, 2017

Yes!!!! can't wait for this.

publiusr · Feb 19, 2017

This needs to be built into some dead malls
http://www.deadmalls.com/

Mytran · Feb 19, 2017

A K-beam structure in Voyager Engine Room?

Now I've seen everything! :-D

137th Gebirg · Feb 19, 2017

Very nice!

batboy853 · Feb 20, 2017

Mytran said:
A K-beam structure in Voyager Engine Room?

Now I've seen everything! :-D

Best shot that comes to mind, but it was there the entire series. As well as s1 arround the cargo bay / holodeck door cause it was still the tng one.

Mytran · Feb 20, 2017

I love Star Trek! All these years later, there's still new things to learn

The K-beams around the Cargo Bay door were only there for a short time however; I KNOW that they got replaced :techman:

DanGovier · Feb 22, 2017

Redgeneral said:
Been working on a little project, still a long way to go

Great idea, I'm planning on doing the same myself for the TMP configuration of Stage 9, but I'm struggling to find a decent blueprint to work from. The best I can come up with seems to be a combination of this one for the general layout: https://www.flickr.com/photos/99878876@N02/14144395532/in/album-72157644182510017

And this one for the set measurements: https://www.flickr.com/photos/99878876@N02/21618151182/in/album-72157644182443257

Unless I'm mistaken, I don't believe the set redress for TNG changed the dimensions a great deal.

BorgMan · Feb 27, 2017

Does anyone have a schematic for the NX-01's plotting table? All the plans mention that they're not to scale so I don't even know the width and length of the thing, let alone how high it's supposed to be and how far that bulge comes out...

Redgeneral · Mar 4, 2017

BorgMan - no idea on table size / schematics, but I've just found some stage blueprints for Enterprise today on the Propworx auction

Propworx auction - note bidding is still live at time of this post

Enterprise stage 8 blueprint (corridors, quarters, sickbay)
https://www.flickr.com/photos/99878876@N02/32864603830/
Source: https://new.liveauctioneers.com/item/51239136_star-trek-enterprise-stage-8-master-blueprint-plan

Enterprise stage 9 blueprint
https://www.flickr.com/photos/99878876@N02/32864604120/
Source: https://new.liveauctioneers.com/item/51239137_star-trek-enterprise-stage-9-master-blueprint-plan

Enterprise stage 18 blueprint (shuttlebay, corridor, engineering, transporter, bridge)
https://www.flickr.com/photos/99878876@N02/32403635904/
Source: https://new.liveauctioneers.com/item/51239138_star-trek-enterprise-stage-18-master-blueprint-plan

Enterprise Future Tense reator blueprint
https://www.flickr.com/photos/99878876@N02/32403636114/
Source: https://new.liveauctioneers.com/item/51239139_star-trek-enterprise-blueprint-copy-collection

Also available:

TNG: I, Borg - "Power Plug Box" concept
https://www.flickr.com/photos/99878876@N02/33091345472/
Source: https://new.liveauctioneers.com/item/51239150_star-trek-the-next-generation-power-plug-box-concept

DS9 "Field of Fire" cargo bay director plan
https://www.flickr.com/photos/99878876@N02/32403636514/
Source: https://new.liveauctioneers.com/item/51239157_star-trek-deep-space-nine-field-of-fire-blueprint

Mytran · Mar 5, 2017

Thanks for sharing these, they're a significant improvement on what was available before!

Redgeneral · Mar 6, 2017

And now some Voyager set research (all links lead to flickr)

I've made a list of which episodes each room appears in. A handy way to find references from trekcore screencaps.
Voyager set reference stage 9
Voyager set reference stage 8 and 16
For example, when working on the brig in sketchup, I can refer to 2x16, 3x25, 4x2,7,22 etc.
I hope this also helps any other cg builders

I've also researched the corridor light slots
(Example: screenshot of Alice - source: trekcore)
These slots vary in number along the corridors, so I had to check screencaps for each story to fill in the gaps and map slot locations and number.
Diagram: Voyager corridor light slots - stage 9

Only two small sections don't have their slots numbered - these are indicted by "?". Going through trekcores screencaps, these sections are not shown with sufficient clarity to count the slots. I would be very greatful if anyone can share a photo or screenshot clearly showing the number of slots of these sections

batboy853 · Mar 6, 2017

Nice! Holy crap I never realized the number of slots changed with each instance that they were placed on the set, I always thought it was 4.

Do you have a similar map with the corridor section lengths? I thought there was on a long time ago.

Redgeneral · Mar 6, 2017

We have a plan for some of the corridor lengths
https://www.flickr.com/photos/99878876@N02/15542048681/in/album-72157644597012434/

The rest are still a work in progress

Mytran · Mar 7, 2017

Redgeneral said:
And now some Voyager set research (all links lead to flickr)

I've made a list of which episodes each room appears in. A handy way to find references from trekcore screencaps.
Voyager set reference stage 9
Voyager set reference stage 8 and 16
For example, when working on the brig in sketchup, I can refer to 2x16, 3x25, 4x2,7,22 etc.
I hope this also helps any other cg builders

This is splendid research, thanks!

Redgeneral · Mar 13, 2017

A part of the Voyager Science Lab set is on ebay - http://www.ebay.co.uk/itm/Original-STAR-TREK-VOYAGER-SET-PIECE-Panel-LCARS-CONSOLE-PROP/302100813325

Ryann866 · Mar 16, 2017

batboy853 said:
Nice!

BTW I was watching TNG "A Matter Of Perspective" The other day when I noticed they had a really good shot of those wall panels they used from s3 on wards whenever they needed to make a quick generic room IE ready room of the USS Pheonix, ST TUC galley, Sutherland bridge. From what I can tell each panel is about the same height as the K-Beams, as in "A Matter of Perspective" The shot where I got the reference image from has the holodeck doors closing and materializing the Panel in it's place. It looks like they also made a narrower version of these panels as well.

After tweaking the image a bit was able to get a pretty close to a 2d representation, one of these days when I have time I might try to make a illustrated blueprint off in illustrator.

These wall panels were originally made for Star Trek V. They were the walls for the brig and I think for the Turboshaft set. I think there must have been a lot of them and they were probably made of vacuformed skins of some kind. After '89 they appeared all over for years on TNG.http://movies.trekcore.com/gallery/displayimage.php?pid=49247&fullsize=1

batboy853 · Mar 16, 2017

Nice! it's been a while since I've watched that one. Additionally they even appeared in the bottomless fight shaft in Nemesis.

Lt. Washburn · Mar 23, 2017

I really should check this thread more often. Redgeneral, the work on the Voyager sets is outstanding. I see a few people doing stuff like this and I always wonder...well, how accurate is their work, really? But with you, you go the extra mile and really research and check everything. I wanted to let you know that I really appreciate it.

Redgeneral · Mar 29, 2017

Lt. Washburn - thank you

I promised quite a while back that I would write a piece on how I made these blueprints. It's taken a long time, but finally "Recreating Studio Sets - The blueprinting process" is now complete and can be downloaded as a PDF
http://radishdalek.deviantart.com/art/Recreating-Studio-Sets-in-Sketchup-671775496

It is currently version 1 - if there's anything anyone would like me to go over in more detail, just ask and I'll update the pdf to cover it.

Redgeneral · Mar 31, 2017

I've found a few blueprints on ebay today...

DS9 stage 18
Episode: "Tears of the Prophets"
Flickr:

This has the Defiant, Temple, Vegas holodeck set, restaurant alley and the Tear shrine room.

Source: http://www.ebay.co.uk/itm/Star-Trek...106407?hash=item4d56d253e7:g:SvkAAOSwuLZY3RNI

DS9 Alley set [outside restaurant]
Episode: "Tears of the Prophets"
Flickr:

Source: http://www.ebay.co.uk/itm/Star-Trek...710780?hash=item36156d2e3c:g:PO4AAOSwhQhY3RI-

TNG Cargo Bay
Episode: "Disaster"
Flickr:

This one is quite interesting - instead of the usual simple redress with a few cargo containers, they effectively built a smaller shuttlebay inside the standard shuttlebay. It also shows the circular cargo transporter.

It should be noted that it has a notice saying "All panels to be spotted and verified" - there may be some differences between the blueprint and final set

After I finish work on the Voyager corridor, I'm going to go over these cargo images and compare my shuttlebay plans.

Source: http://www.ebay.co.uk/itm/Star-Trek...716394?hash=item36156d442a:g:W5wAAOSww3tY3RQy

VOY Alien Quarters
Episode: "The Disease"
Flickr:

Source: http://www.ebay.co.uk/itm/Star-Trek...111025?hash=item4d56d265f1:g:x0YAAOSwsW9Y3RUK

The seller is also sell a sheet with some Enterprise D model dimensions - http://www.ebay.com/itm/Star-Trek-T...030966?hash=item36148d2f36:g:p8kAAOSwWxNYyqVh

Set blueprint exchange

Captain

Admiral

Rear Admiral

Mostly Peaceful

Captain

Rear Admiral

Commander

Fleet Captain

Commander

Rear Admiral

Commander

Captain

Commander

Rear Admiral

Commander

Lieutenant Commander

Captain

Captain

Commander

Commander

Similar threads

We value your privacy