Set blueprint exchange

Pretty sure the Warp Geometry Bubble graphic was created by Mike Okuda for the Enterprise-A bridge at the end of The Voyage Home, and was reproduced in Lora Johnson's Mr. Scott's Guide.
 
comingofage_hd_163.jpg
Open the shuttlebay doors.

"Sorry, dear--I can't do that."
 
The LCARS currently listed as 'Unknown J" in the LCARS - TNG folder is from Science II on 'Firstborn' (s7e21). It was then used on Environment in 'All Good Things'.
On the same AGT shot you can see the LCARS listed as "Engineering - Unknown A" is from the bridge engineering station.
3cefca2c39b4ccd48c19da9a94661b4c.jpg

firstborn-hd-170.jpg

all-good-things-hd-812.jpg
7b4d5d32d6619e5c2ff8aa87bf3aa708.jpg
 
Last edited:
@publiusr I thought there were some like that already in the archive? I feel like the archive has the complete type 9 prints in pretty decent quality.

Keep in mind the shuttle set was never completed until Basics part 2.

Scout ship:
http://archive.frogland.co.uk/#15444658681181/16450266565111
http://archive.frogland.co.uk/#15444658681181/16450266533124

Type 9
http://archive.frogland.co.uk/#15444658681181/15444659794028
http://archive.frogland.co.uk/#15444658681181/15444659795669
http://archive.frogland.co.uk/#15444658681181/16760682513020
 
Count hier ist ein Vorgeschmack.. Ich bin gerade dabei, alle meine Papierdrucke zu konvertieren, ich habe eine Tonne von First Contact. Ich arbeite an meinem Projekt der Enterprise-B, also versuche ich, das zuerst zu erledigen.

Ich hatte das Glück, auch alle Vektordateien von Star Trek First Contact, Labels, Iso-Chips, alle Grafiken auf allen Sets zu bekommen.:D
1CountP.jpg
[/ZITIEREN]
Hallo alle zusammen ,ich baue mir gerade eine Brücke der enterprise e und würde mich freuen, wenn ich Zugriff auf ein paar Infos Dateien hätte!!!
 
I'm not sure what this is, but are you a real person or some kind of bot, @EvilGames12627? First of all it's weird that you're writing in German (this is an English language message board), but not only that, but it's wrong German, as if automatically translated. No actual German Trek fan would ever call the Enterprise “Firma”. So again, what exactly are you?
 
I don't know about that, but there was a group of German fans building an Ent-E bridge a few years back. They fixed up a converted barn/warehouse and got as far as building the deck platforms before it seemed to peter out; maybe it's being revived?
 
@publiusr IIRC, that was the original planned set for the control room at Epsilon IX. Either budget or time (probably both) caused them to scale it down to what we ultimately saw onscreen.
 
Back
Top