Atolm's Romulan D'Tarsek class

[BorgMan]

Been fiddling around with @Atolm's design a bit (you can find more on that here and here) and, after some trial and error, have a little WIP to present:



Bridge superstructure is far from done, and I'm also struggling a bit with some of the more disambiguous shapes like the Klingon bridge-inspired structure under the bridge and how to let the upper wing structure flow into the underside a bit.

I'm also pondering if this bird will be a singularity-core prototype; sketch included in the gallery. I'm just not entirely sure if the dimensions I'm using are feasible. But that's for later.

 

[Finn]

Nice

 

[Atolm]

Been fiddling around with @Atolm's design a bit (you can find more on that here and here) and, after some trial and error, have a little WIP to present:



Bridge superstructure is far from done, and I'm also struggling a bit with some of the more disambiguous shapes like the Klingon bridge-inspired structure under the bridge and how to let the upper wing structure flow into the underside a bit.

I'm also pondering if this bird will be a singularity-core prototype; sketch included in the gallery. I'm just not entirely sure if the dimensions I'm using are feasible. But that's for later.

Hey thank you Brother!!! I am honoured. If you need anything , let me know, and I'll see what I can drum-up. And fyi: your fin placement is off...it should be almost flush with the dorsal superstructure.

 

[BorgMan]

And fyi: your fin placement is off...it should be almost flush with the dorsal superstructure.

That was one of the things I had trouble with. The 3/4 view makes it look like there's an inlet right behind the bridge which then stretches aft into the fin. If I'd make it flatter, that inlet wouldn't be doing a lot. So... yeah. What to do?

 

[Atolm]

That was one of the things I had trouble with. The 3/4 view makes it look like there's an inlet right behind the bridge which then stretches aft into the fin. If I'd make it flatter, that inlet wouldn't be doing a lot. So... yeah. What to do?

I am making a compromise for you right now... a few mins

 

[Atolm]

How's about this:

 

[BorgMan]

So... does that circular part in front of the bridge continue underneath the wedge? I understand better how the tail works at least, so that's great. Thanks man!

 

[Santaman]

Awesome work you two.

 

[Atolm]

So... does that circular part in front of the bridge continue underneath the wedge? I understand better how the tail works at least, so that's great. Thanks man!

Gotcha, this may work:

 

[BorgMan]

Does the fin become narrower towards the end? Like it does in my initial model?

 

[Atolm]

Does the fin become narrower towards the end? Like it does in my initial model?

Yeah, it's a subtle tapering that you have.

 

[Atolm]

@BorgMan here is the above pic, but with a side view of the diagram:

Still phenomenal work on her @BorgMan ... Oh and I love your proto-S-Core!!!

 

[BorgMan]

Nice. I can work with that!

 

[Atolm]

Nice. I can work with that!

Aces!

 

[Kaiser]

Sweet

 

[publiusr]

@BorgMan here is the above pic, but with a side view of the diagram:

Still phenomenal work on her @BorgMan ... Oh and I love your proto-S-Core!!!

That is a good ship all by itself