Hello all, well.. while I keep working on the Time Lord Compendium, and the TARDIS poster schematics.. I felt that it would be pretty cool to share the internal schamtic of the endo shell of the TARDIS. now below, you will notice there are some squiggly lines inside the sphere shape.. these are meant to depict the dimensional field barriers.. or Dimensional dams.. these indicate that the scale factor is reduced as one moves closer to the center, however this scale is relative to the scale you were just at before crossing over.. so tho you may be smaller in size in that respect, you are still the same size relative to the rest of the ship.
anyhow, check out the design below: the are a work in progress..
Also, the interior of the Endo Shell is covered in massive roundels, and looks like the roundels akin to the HARTNELL TARDIS seen in the original pilot. This information comes from the Doctor Who Comic Skyjacks. the exterior of the Endo shell has Gallifreyan Markings on it. if the TARDIS flipped it's interior onto the exterior shell like War TARDISes can do, the image would be a massive moon sized TARDIS concrete style with Time Lord Markings sphere, with the interior as show above..
the TARDIS is massive, but it can also shrink to just the core structure inside the sphere.. and the shell can also shrink to match the scale. the outer ring of columns is the holding ring, and holds the dimensional scale out, and holds permanent rooms like saving directly to your hard drive..
the TARDIS is segmented into different scales. from the outside it's larger, but as you move inside the sphere towards the center of the ship, the dimensional forces are stronger, and each pocket of scaled time, and space is a layer leading to the middle. As you move from one section to the ship to the other, you can find yourself being converted by the different field barriers, which may shrink you relative to the surroundings, or enlarge you, tho you will not feel a difference, as the size is relative to that portion of the ship you enter and exit. More to come on this, and the Endo shell later. Obviously the outer shell is called the Exo Shell.
in the image above, the black section inside the endo shell, should actually be massive ginormous roundels akin to the classic 1st Doctor's console room..this is a feature that was revealed in the comic book Doctor who Sky Jack. This page will be added to the compendium upon completion of the diagram.
there are several flat planes of rings which work their way into the center of the ship. as the ship grows another ring is developed to provide the support for the interior structure. the rooms in the inside middle of the ring with the columns is where all the corridors and such are formatted. the outer ring with columns is the holding ring, and will act as a concrete station for rooms saved permanently.. like a hard drive..
the squiggly white lines that encircle the main structure are to indicate the different dimensional field barriers that separate the different size scales within the dimensional bubble of the endo-shell. the TARDIS is not just it's own dimension, but the ship itself fills the dimension. also, the armillary nature of the core rooms structures, allows for the ship to adjust itself if the exterior shell is landed inappropriately.
from the real world:
stability of a pocket, or shell universe such as this depends on the balance of gravity and inertia. otherwise it will expand and contract, oscillating uncontrollably. as mass is added, the balance must be maintained. the size of the pocket depends upon the amount of mass.
since Timelords have the technology of inertial dampers and dimensional transendentialism, these concerns are irrelevant, or perhaps integral.
since they have the Eye of Harmony, and it's infinite supply of power, but finite output of power, they can control the rate of growth, the scales and the time within the dimensional bubble at will. Now, the ship's endo shell isn't as massive as it looks.. it is huge, but erroneously small in comparison to the normal universe scales. This allows for the ship's interior to be wrapped up in a tight little package. Gravity only exists in the shell by a controlled system, that can make the ship's corridors that loop upward actually have gravity orientate to the floor, or ceiling, or allow for you to use curved anti-grav lifts. Picture on your image viewer program, if you select an image to view, and have the feature to roll the central mouse wheel and the image will increase in zoom, and decrease in zoom. this feature is like the TARDIS endo shell.. it can grow in circumference, or shrink in circumference, depending on the mass scale you decide to grow within the ship. now the internal structure of the ship is also free floating and it can move itself back into position via it's gyroscopic stabilizer. the RDS system maintains and repairs rooms that are damaged.. this design marries all the aspects of the McKinstry Journey to the centre of the TARDIs map, and the information given in various comic resources, and the novels. specifically the novel where Tegan goes to the observation platform and sees the TARDIS begin to break up. inside the endo shell, the space is so large, there are actual clouds of energy all around the circumference of the sphere shell. The shell can be made to have pockets of atmosphere for someone who ventures outside the normal TARDIS structure.
A side note: How a Corporation with billions in funds could develop a Warp Drive
It would need to gather as much information from NASA as it could, and in addition, with private funding, commence experiments on producing the engine, first using quantum computers, and 3D modeling and software written to specific parameters that use data of know physics experiments, and compile that with data from the Large Hadron collider.. in addition, there should be work done on electromagnetism, and it's relation to anti gravitic properties. I would also look at Mercury Vortex engine manipulations, and wormhole technology. But for the most part, warping space takes a tremendous amount of energy, but what if you built a warp drive that could be powered by a sun..
Instead of finding the power source, the ship gets close enough to the solar body, and uses the power of the solar body to warp space around the ship, and zip to another system instantly..
the warping energy source needed at such a small scale of mass, could then be found later. Like dark matter, or black super dense Magnetically charged star core matter (that didn't create a black hole, but condensed enough to create a warping effect on space itself because of it's mass, and gravity reactions). Though capturing a piece of that would take an effort because approaching the gravity well and distortion field created by such an object, which I believe COULD exist, tho not found yet, could be treacherous and would need technology developed to gather such a power source.
----------
http://s1380.photobucket.com/user/Skywarp-2/media/Gallifreyan Bow Ship Page 1A_zpskdlxhm3a.png.html
http://s1380.photobucket.com/user/Skywarp-2/media/Gallifreyan Bow Ship Page 1A_zpskdlxhm3a.png.html
