Set blueprint exchange

[batboy853]

Red Alert! Incoming blueprints! I was just trying to find some blueprints that I got off of Joe's website years ago of the klingon court room when I found this

http://www.startrekblueprints.com/

So much in there that we don't have! But the images are low resolution? Do we know who this is?

 

[JoeRalat]

Yeah..Want to hear a sad story..Of a First World Sad Story. I own that domain, during the run on the site, there was an issue with virus..the forum I was running was kept on being attack..It got to the point that I shut every thing down, but I kept paying for the domains. I come to find out the company never paid "The main domain people" to keep it registered with me. So I thinking that I still own my domains. So when I go and find a new hosting and start to move over the domain. I found out they are now gone and own by someone else.

The thing that sucks about the internet, is people use different names on forums, Facebook..etc so its hard to tell. I think I may have done some trades with this guy. I think he was asking me about some TNG Prints. He now owns one of my domains.

Just to be clear, not his fault...my hosting site fault>

 

[batboy853]

Just to be clear, not his fault...my hosting site fault>

Wow that sucks, Hopefully they reimbursed you for that or gave you free hosting for life.

 

[JoeRalat]

Nope price that I paid to register the domain

 

[batboy853]

I have sent a message via the contact page on that site asking if he had higher resolution images and if he is willing to share. hopefully he responds back.

It also looks like on a few images they show the lower level of engineering that someone was looking for a page or 2 ago.

 

[Count]

A lot of those images look familiar... as in too familiar, as in they're the same ones that popped up on ebay that our project has harvested. There are a few unique ones there, but I'd hazard a guess if hes' not lurking on trekbbs taking prints we find, he's just digging up old photos on the web (alas, why no high res, he's put htem all small enough to be consistent and maintain an illusion).

could be wrong, but don't hold your breath on him sending anything back.

 

[batboy853]

Yeah I am not but hoping! it looks like he has the prints for all of DS9's Ops and Most of the Promenade.

 

[JoeRalat]

I know I have almost every print there. I don't remember posting images of them online.

 

[QuinnTV]

I also sent a note in requesting higher resolution versions. I really want to see the TNG Conn/Ops console prints.

 

[batboy853]

haha! hopefully we dont blow up his inbox.

Also I found the blueprints of the klingon courtroom I was looking for earlier here they are they are originally from Joe's site:

https://flic.kr/p/zfqM7X

https://flic.kr/p/zwWQEZ

 

[Count]

@JoeRalat: Question for oyu and your gigantic database of blueprints. The ones that are most sought after but not available are the Enterprise-E's corridors from first contact (the rest of the set that wasn't the engine room) and the Jefferies tubes for TNG. Don't suppose those are anywhere in your collection, are they?

 

[JoeRalat]

Hey Count. The only print I have of the corridors is a section from nemesis that was blown out for data's jump.

A list of the Enterprise-E

I have the Jefferies Tube of the Enterprise-E From Nemesis

I do and don't have the Jefferies Tube from TNG. I have a print from Good Shepherd, that has a set that used the Jefferies Tube. The only change is the floor is extended down. The Tube is the same as the TNG and Voyager.

 

[Mytran]

I really liked that they used a different type of corridor for Deck 15. It's a tiny deck, so only makes sense that the standard 8' corridors would be replaced.

Just a shape that we already saw Deck 15 in Deadlock, and it was the standard corridor network! Ah, well

 

[Count]

Hey Count. The only print I have of the corridors is a section from nemesis that was blown out for data's jump.

A list of the Enterprise-E

I have the Jefferies Tube of the Enterprise-E From Nemesis

I do and don't have the Jefferies Tube from TNG. I have a print from Good Shepherd, that has a set that used the Jefferies Tube. The only change is the floor is extended down. The Tube is the same as the TNG and Voyager.

Cool, that's fair enough, been a shot in the dark for a long time getting the FC corridors. Someone had a rough map drawn quite some time ago on the thread of how they thought the corridors were set up, I guess that'll have to do for my 3d modelling project

I don't suppose your blueprints of deck 15 had the dimensions of the "jefferies tube" bit of that corridor? arch height/width, etc..?

 

[JoeRalat]

Mytran. Its always nice to see different sets, also happy they did it this way. I have two sets for the price of one.

Count
The Jeffereies Tube. Im 90% sure it has the info. Im getting in a few prints tomorrow, when I put them with the collection, I will check

Not sure if you have the ST Sketch book. Its one of my fav. I took some shots of the corridor from the book

I also have a top view of the corridor, sorry for the way it looks, its better at full size. Not as dark

 

[batboy853]

Hey Joe question or anyone, do you currently have any blueprints of the set of the Cardassian freighter from Return To Grace, We have the set walls and stuff but I am looking for like the consoles and the Cardassian Captains chair. Im currently building it for a 3d project.

Also if you need a quick way to get the images scanned, If you have a smartphone with a high resolution camera there is an app called Mobile doc scanner that works great for scanning images using your smartphones camera!

 

[JoeRalat]

No sorry don't have that, DS9 Prints do not show up too often. So when I see them, I like to pick them up.

I will look at the app. One of my projects in the next coming months is to buy copies of all my trek reference books & Magazines and scan them into the computer.

 

[Count]

Mytran. Its always nice to see different sets, also happy they did it this way. I have two sets for the price of one.

Count
The Jeffereies Tube. Im 90% sure it has the info. Im getting in a few prints tomorrow, when I put them with the collection, I will check

Not sure if you have the ST Sketch book. Its one of my fav. I took some shots of the corridor from the book

I also have a top view of the corridor, sorry for the way it looks, its better at full size. Not as dark

Nice pics, thanks, they help a bit. still wish I had an overall view of the sets though

I haven't been able to get a copy of that book locally, unfortunantly, Wish i could though.

Hey Joe question or anyone, do you currently have any blueprints of the set of the Cardassian freighter from Return To Grace, We have the set walls and stuff but I am looking for like the consoles and the Cardassian Captains chair. Im currently building it for a 3d project.

Also if you need a quick way to get the images scanned, If you have a smartphone with a high resolution camera there is an app called Mobile doc scanner that works great for scanning images using your smartphones camera!

we've had those for months Batboy:
https://www.flickr.com/photos/99878876@N02/15440997044/in/album-72157649432531497/

 

[batboy853]

We have the set walls and stuff but I am looking for like the consoles and the Cardassian Captains chair.

we've had those for months Batboy:
https://www.flickr.com/photos/99878876@N02/15440997044/in/album-72157649432531497/

Yup that Is what I am referencing when I said we have the set walls and stuff. That print is missing the platform that the captains Chair as well as the chair, and consoles. The print is the set but none of the other parts that went along with it. I am guess they were built for other episodes and then thrown in the set.

 

[JoeRalat]

New Post over at my site. StarTrekReference.com. I added a blueprint of the shuttlepod.

Here is a preview. Large image on the site.