Any other Dreadnaughts?

[JJohnson]

We've seen the All Good Things variant of the Galaxy-Class Enterprise-D and its additions to the baseline model:
-third nacelle attached to engineering hull
-protrusions with phaser banks on each nacelle
-phaser fins on dorsal surface of saucer and twin torpedo launcher
-phaser cannon on ventral surface of saucer section reaching back to neck
-fins on outer two warp pylons with phaser strips/banks on either side of the fin.

I was wondering, is there a correspondingly altered Sovereign, Ambassador, Excelsior Regular/Refit, and Refit/Regular Constitution-Class out there?

 

[MisterD]

Google Image search says yes. Loads of them....

 

[JJohnson]

I'm not finding a good Ambassador. I found an Excelsior with the nacelle attached either to the saucer or to an extended neck, not the engineering hull. I found a Constitution with the third nacelle attached to the saucer, not the engineering hull. The Sovereign class I found here, is better than others, but not quite - I'm not looking for a saucer cut-out. I'm looking for the Sovereign, Ambassador, Excelsior original/refit, and Constitution series/refit altered the same way as the Galaxy was for AGT - add a third nacelle onto the top of the engineering hull with a single pylon and a bit of extension of the engineering hull; phaser cannon under the saucer; a fin on the two outer nacelle pylons with phaser strips above/below; two smaller phaser cannon fins flanking either side of the bridge; torpedo launcher aft of the bridge on top of the saucer; protrusions on top of the nacelles with phaser strips on top if feasible. That's what I was looking for, but have not found myself as of yet.

 

[Forbin]

Here are some 3-engine dreads I've done:
http://www.inpayne.com/models/kitbash/trekpage_them.html
http://www.inpayne.com/models/kitbash/trekpage_belisarius.html
http://www.inpayne.com/models/kitbash/trekpage_dominion.html
http://www.inpayne.com/models/kitbash/trekpage_kirov.html

...and a 3-engine hospital ship:
http://www.inpayne.com/models/kitbash/trekpage_hope.html

...and a 4-engine battleship:
http://www.inpayne.com/models/kitbash/trekpage_lion.html

...and a 4-engine hi-speed diplomatic transport:
http://www.inpayne.com/models/kitbash/trekpage_alliance.html

 

[fireproof78]

Here are some 3-engine dreads I've done:
http://www.inpayne.com/models/kitbash/trekpage_them.html
http://www.inpayne.com/models/kitbash/trekpage_belisarius.html
http://www.inpayne.com/models/kitbash/trekpage_dominion.html
http://www.inpayne.com/models/kitbash/trekpage_kirov.html

...and a 3-engine hospital ship:
http://www.inpayne.com/models/kitbash/trekpage_hope.html

...and a 4-engine battleship:
http://www.inpayne.com/models/kitbash/trekpage_lion.html

...and a 4-engine hi-speed diplomatic transport:
http://www.inpayne.com/models/kitbash/trekpage_alliance.html

Good stuff. The battleship and Transport look really good.

 

[Dukhat]

I'm not finding a good Ambassador.

The canon Niagara class consisted of a Galaxy-type saucer, an Ambassador secondary hull (without the neck), and three Galaxy class nacelles. Although the ship has never been described as a dreadnought, it's the closest design we've got that utilizes any Ambassador parts.

 

[publiusr]

The Constellation with four nacelles a batch for SFB’s B-10 then?