2013 Star Trek HOT WHEELS - Excelsior, Kelvin, Vengeance, BoP
- Thread starter Tribble puncher
- Start date
I did finally get Vengeance (villain ship) as part of the Wal Mart exclusive DVD blu-ray everything set.
The ship came on a card, and the plastic bubble which wrapped the ship might be different than the Hot Wheel box version. I wouldn't consider it re-casting to pour resin or plaster into a disposable plastic clam shell--but if you were to do that, you would get a solid saucer with no cut outs.
The flat flank of the secondary hull might be a good place to put nacelle supports for a larger ship, with a tube recessed into the boxy lower hul to approximate a more standard seconary hull.
The Vengeance actualy has the best 3/4 views of any ship--it is actually more graceful than it looks at first. Or maybe Hot Wheels just had the nacelles up higher.
The ship came on a card, and the plastic bubble which wrapped the ship might be different than the Hot Wheel box version. I wouldn't consider it re-casting to pour resin or plaster into a disposable plastic clam shell--but if you were to do that, you would get a solid saucer with no cut outs.
The flat flank of the secondary hull might be a good place to put nacelle supports for a larger ship, with a tube recessed into the boxy lower hul to approximate a more standard seconary hull.
The Vengeance actualy has the best 3/4 views of any ship--it is actually more graceful than it looks at first. Or maybe Hot Wheels just had the nacelles up higher.
I just got back from a local flea market here in Lexington, KY. Surprisingly, I found the entire 2013 wave of hot wheels trek ships there. for, get this 3.99 a piece! they all had crushed packaging...the kelvin was so bad that the upper hull was bent, (I passed on that one) I got the BOP, which I didn't have, the excelsior, to replace the first one I got that had a slightly bent unfixable warp engine, and another vengeance, just because I couldn't leave it there for 4 bucks.
On an off topic, has anyone figured out how to dig the ball socket out of these ships when the stands break? I just had my original series 1701 stand break off, and I don't know how to get that thing out without damaging the ship itself...I considered drilling...
On an off topic, has anyone figured out how to dig the ball socket out of these ships when the stands break? I just had my original series 1701 stand break off, and I don't know how to get that thing out without damaging the ship itself...I considered drilling...
Sounds like that flea market got its hands on some damaged lots (product that someone sent back to the manufacturer because it had arrived to them in non-mint or poor condition; the manufacturer sold them off to someone else in "buy as-is" lots to try to get something out of them).
I figure it was something like that, or that the guy who owned the booth had bought a few cases and one of them was damaged, and he just threw them out there because it was less hassle then returning...I'm sure the undamaged ones were on ebay or amazon if thats what the deal was...
Yeah, that's a toughie. I'm not sure it would even drill out very easy. Maybe a tiny bit could get in there enough to pull out. :/
I'm hoping that since the stopped using the transparent plastic that kind of think won't happen with the 2013 releases. I've noticed that transparent plastic isn't very robust, the few 2009 HW ships I have the stands have warped and the ships are all droopy (but at least mine haven't broken yet).
FYI...the above method worked...I was able to get the broken balls joints out of all 3 ships. no damage to any of them.
Anyone notice the nacelle being "loose" on the Kelvin? Causing a slight tilt when the ship is on the stand?
Yeah, the "glue" holding the nacelle to the saucer came loose rather quickly on mine, my Kelvin's nacelle wiggles slightly now, it's not a huge deal to me, the nacelles still on good. but it looks crooked on the stand unless you adjust it after positioning it.
I've been collecting the Eaglemoss models - apparently they have a Kelvin lined up.
The quality of the Ent-D was really good, so I'll buy these rather than the not so cheap n' nasty hot wheels models.
This chap has a nice review of the latest issue:
http://whentoysruletheworld.blogspot.co.uk/2013/09/review-eaglemoss-star-trek-starships.html
Also, feel free to check out my own blog:
http://ryesofthegeek.wordpress.com/
The quality of the Ent-D was really good, so I'll buy these rather than the not so cheap n' nasty hot wheels models.
This chap has a nice review of the latest issue:
http://whentoysruletheworld.blogspot.co.uk/2013/09/review-eaglemoss-star-trek-starships.html
Also, feel free to check out my own blog:
http://ryesofthegeek.wordpress.com/
Hey Peeps!
Read that HW's are re-releasing the smaller carded 1701 Enterprise, with painted nacelles and more paint-apps:
http://www.trektoy.com/forum/index.php?showtopic=4802&page=11
(see post number 206 on page 11 - from Darth_Duranium):
Cant wait to see this hit shelves!
Read that HW's are re-releasing the smaller carded 1701 Enterprise, with painted nacelles and more paint-apps:http://www.trektoy.com/forum/index.php?showtopic=4802&page=11
(see post number 206 on page 11 - from Darth_Duranium):
Cant wait to see this hit shelves!
It was pure luck that I got one of the 2013 version by walking into a Target at the right time on the right day--and haven't seen one again anywhere in the several months since. I doubt that the improved 2014 version will be any easier to find.
Similar threads
