Enterprise collectable to ID

ItsGreen · January 29 2013, 08:51 PM

Have this sculpture, it appears to be resin with a metal interior (the saucer was snapped off). Overall length is 6", the saucer is 2.5" in diameter and the nacelles are 3" long. The deflector dish is gold/brass colored metal. There is a mounting hole on one side of the body. No markings as to manufacture, anyone recognise it?

link below to large size

http://img13.imageshack.us/img13/372/enterprise1701.jpg

CaptainDave1701 · January 29 2013, 10:45 PM

Just a hunch but it could be part of a kit that was taken from the episode The Enterprise Incident. The hole is in the right spot for the mounting post where it mounted onto the background.Again...just a hunch as I had this kit at one time.

ItsGreen · January 30 2013, 05:10 PM

Thanks for that info.

I never had that model and looking at it, it is not same as the Enterprise I have. One thing, the mounting hole is on the other side, but thanks again for the suggestion.

This item is heavy/solid and does not look to be from a model kit, perhaps from some sort of diaroma piece, more research and I found this but again the mounting hole is on the wrong side,

Melakon · January 30 2013, 06:13 PM

Could it be an old issue from Franklin Mint? Though I think most of theirs were in pewter, and I couldn't find any Trek stuff on their website.

CaptainDave1701 · January 30 2013, 09:40 PM

I wonder if it came from a snowglobe?
Here is a link to one. You can't see where it is mounted but the resin could be a clue.

http://www.decorationwarehouse.com/s...category=69661

ItsGreen · January 31 2013, 04:15 PM

I think I've ID this item, I believe it's from 1993, a bookend, Paramont, Willitts Designs Authorized Dealer, never had the bookend, just have the Enterprise, thanks for the input and help.

January 29 2013, 08:51 PM	#1
ItsGreen Commander	Enterprise collectable to ID Have this sculpture, it appears to be resin with a metal interior (the saucer was snapped off). Overall length is 6", the saucer is 2.5" in diameter and the nacelles are 3" long. The deflector dish is gold/brass colored metal. There is a mounting hole on one side of the body. No markings as to manufacture, anyone recognise it? link below to large size http://img13.imageshack.us/img13/372/enterprise1701.jpg

January 29 2013, 10:45 PM	#2
CaptainDave1701 Lieutenant	Re: Enterprise collectable to ID Just a hunch but it could be part of a kit that was taken from the episode The Enterprise Incident. The hole is in the right spot for the mounting post where it mounted onto the background.Again...just a hunch as I had this kit at one time.

January 30 2013, 05:10 PM	#3
ItsGreen Commander	Re: Enterprise collectable to ID Thanks for that info. I never had that model and looking at it, it is not same as the Enterprise I have. One thing, the mounting hole is on the other side, but thanks again for the suggestion. This item is heavy/solid and does not look to be from a model kit, perhaps from some sort of diaroma piece, more research and I found this but again the mounting hole is on the wrong side,

January 30 2013, 06:13 PM	#4
Melakon Commodore Location: Unmarked grave, Ekos	Re: Enterprise collectable to ID Could it be an old issue from Franklin Mint? Though I think most of theirs were in pewter, and I couldn't find any Trek stuff on their website. __________________ "Every time you think, you weaken the nation." --Moe Howard

January 30 2013, 09:40 PM	#5
CaptainDave1701 Lieutenant	Re: Enterprise collectable to ID I wonder if it came from a snowglobe? Here is a link to one. You can't see where it is mounted but the resin could be a clue. http://www.decorationwarehouse.com/s...category=69661

STAR TREK

CSI

ABOUT US

January 31 2013, 04:15 PM	#6
ItsGreen Commander	Re: Enterprise collectable to ID I think I've ID this item, I believe it's from 1993, a bookend, Paramont, Willitts Designs Authorized Dealer, never had the bookend, just have the Enterprise, thanks for the input and help.