Schematics made with Vance's toolkit - Page 34

Kaiser · July 14 2012, 10:56 PM

Nice work on the Cochise

largo · July 15 2012, 05:59 PM

publiusr wrote:

On the Dastoor, if the nacelles were ever so slightly higher, and the two sensor pods were shrunk and moved closer together and farther back to either side of the impulse deflection crystal, it would mirror the nacelles better.

would there be some advantage to that?

orrad · July 20 2012, 10:32 PM

I decided to modify the Diana Class Scout which was created by Vance. I reduced the number of warp nacelles to just one and added a sensor pod.

Kaiser · July 20 2012, 11:18 PM

Nice precurser to i think Jackill's Anubis class Scout

publiusr · July 21 2012, 08:51 PM

largo wrote:

publiusr wrote:

On the Dastoor, if the nacelles were ever so slightly higher, and the two sensor pods were shrunk and moved closer together and farther back to either side of the impulse deflection crystal, it would mirror the nacelles better.

would there be some advantage to that?

Having the nacelles a bit above them would give clearance.

admiralelm11 · July 26 2012, 05:06 AM

Loving the Shepherd, Knox, and Dastoor class ships. It's interesting what you can do with your computer, time, and patience.

orrad · July 26 2012, 05:42 AM

Thank you, but you forgot two more things. Photoshop and Vance's tool kit.

orrad · July 29 2012, 07:06 PM

Like the Knox Class I made a few modifications to the Exultant class. Again removing the “mega phasers” and replacing them with sensor pods.

Version 1

Version 2

Kaiser · July 29 2012, 07:42 PM

Good Alternative to the USS Saratoga from the first DS9 ep

BlenderFan · November 30 2012, 09:37 AM

Hi all

A Question (sorry for my bad englisch) can i use this concepts for 3D Modells? I use Blender.

sojourner · November 30 2012, 06:52 PM

Shouldn't be a problem, just try and credit the designers when possible.

July 14 2012, 10:56 PM	#496
Kaiser Rear Admiral Location: Boyertown, PA as of July 2011	Re: Schematics made with Vance's toolkit Nice work on the Cochise __________________ https://www.facebook.com/groups/112860258811333/ For all your Sci-fi ship model and mini goodness 3DS Friend code: 0731-4800-6817

July 20 2012, 10:32 PM	#498
orrad Ensign	Re: Schematics made with Vance's toolkit I decided to modify the Diana Class Scout which was created by Vance. I reduced the number of warp nacelles to just one and added a sensor pod.

July 20 2012, 11:18 PM	#499
Kaiser Rear Admiral Location: Boyertown, PA as of July 2011	Re: Schematics made with Vance's toolkit Nice precurser to i think Jackill's Anubis class Scout __________________ https://www.facebook.com/groups/112860258811333/ For all your Sci-fi ship model and mini goodness 3DS Friend code: 0731-4800-6817

July 26 2012, 05:06 AM	#501
admiralelm11 Lieutenant Commander Location: Vancouver, WA	Re: Schematics made with Vance's toolkit Loving the Shepherd, Knox, and Dastoor class ships. It's interesting what you can do with your computer, time, and patience. __________________ Thank you to FltCpt. Bossco at STPMA for my avatar. He is one of the best. This is Tolen, a Horrusi captain in Starfleet, who commands the Sovereign class starship U.S.S. Sangamon.

July 26 2012, 05:42 AM	#502
orrad Ensign	Re: Schematics made with Vance's toolkit Thank you, but you forgot two more things. Photoshop and Vance's tool kit.

STAR TREK

CSI

ABOUT US

July 29 2012, 07:06 PM	#503
orrad Ensign	Re: Schematics made with Vance's toolkit Like the Knox Class I made a few modifications to the Exultant class. Again removing the “mega phasers” and replacing them with sensor pods. Version 1 Version 2

July 29 2012, 07:42 PM	#504
Kaiser Rear Admiral Location: Boyertown, PA as of July 2011	Re: Schematics made with Vance's toolkit Good Alternative to the USS Saratoga from the first DS9 ep __________________ https://www.facebook.com/groups/112860258811333/ For all your Sci-fi ship model and mini goodness 3DS Friend code: 0731-4800-6817

November 30 2012, 09:37 AM	#505
BlenderFan Cadet	Re: Schematics made with Vance's toolkit Hi all A Question (sorry for my bad englisch) can i use this concepts for 3D Modells? I use Blender.

November 30 2012, 06:52 PM	#506
sojourner Vice Admiral Location: I'm at WKRP	Re: Schematics made with Vance's toolkit Shouldn't be a problem, just try and credit the designers when possible. __________________ Baby, you and me were never meant to be, just maybe think of me once in a while...