Welcome! The Trek BBS is the number one place to chat about Star Trek with likeminded fans. Please login to see our full range of forums as well as the ability to send and receive private messages, track your favourite topics and of course join in the discussions. If you are a new visitor, join us for free. If you are an existing member please login below. Note: for members who joined under our old messageboard system, please login with your display name not your login name. 

Miscellaneous Discussion of nonTrek topics. 

Thread Tools 
July 8 2009, 06:33 PM  #16 
Fleet Admiral

Re: Tuesday Night Quiz!
__________________
"I just don't see you as a Southern belle." RoJoHen, to me 
July 8 2009, 06:57 PM  #17 
World Famous Starship Captain

Re: Tuesday Night Quiz!
__________________
"In Germany, fear comes before sex... and if you're lucky, then a little bit later, an elf."  Victoria Coren Mitchell "Everybody has a secret world inside of them..."  Neil Gaiman

July 8 2009, 07:40 PM  #18  
Commodore

Re: Tuesday Night Quiz!
This explains why the Warcom was inoperative this morning... And this gear ratio stuff is too much like work I tell you! 

July 8 2009, 07:42 PM  #19  
World Famous Starship Captain

Re: Tuesday Night Quiz!
__________________
"In Germany, fear comes before sex... and if you're lucky, then a little bit later, an elf."  Victoria Coren Mitchell "Everybody has a secret world inside of them..."  Neil Gaiman


July 8 2009, 08:25 PM  #20 
Commodore

Re: Tuesday Night Quiz!
ACHTUNG! ALLES TURISTEN UND NONTEKNISCHEN LOOKENPEEPERS! DAS BENDINGSCHNITCLE IST NICHT FÜR DER GEFINGERPOKEN UND MITTENGRABEN! ODERWISE IST EASY TO SCHNAPPEN DER SPRINGENWERK, BLOWENFUSEN UND POPPENCORKEN MIT SPITZENSPARKSEN. IST NICHT FÜR GEWERKEN BEI DUMMKOPFEN! DER RUBBERNECKEN SIGHTSEEREN KEEPEN DAS COTTONPICKEN HÄNDER IN DAS POCKETS MUSS. ZO RELAXEN UND WATSCHEN DER BLINKENLICHTEN. 
July 8 2009, 09:30 PM  #21 
Clone
Location: hitching a ride to Erebor

Re: Tuesday Night Quiz!
__________________
Space is disease and danger wrapped in darkness and silence  Dr. McCoy And he says that like it's a bad thing... 
July 9 2009, 12:14 AM  #22 
Idealistic Cynic and Canon Champion
Location: RJDiogenes of Boston

Re: Tuesday Night Quiz!
__________________
Please stop by my Gallery and YouTube Page for a visit. And read Trunkards! And check out my Heroes essays. 
July 9 2009, 12:30 AM  #23 
on holiday
Location: England

Re: Tuesday Night Quiz!
Suppose the teeth counts are a, b and c. We know that b=a+c. So that's tooth ratios of a : (a+c) : c. Those are the only two variables you need; you don't need to introduce any more. Once you get the logic set up, it unfolds beautifully to give the solution, and it's all elementary algebra. If cog A does 1 revolution... then what?
__________________
. 
July 9 2009, 12:33 AM  #24 
Idealistic Cynic and Canon Champion
Location: RJDiogenes of Boston

Re: Tuesday Night Quiz!
__________________
Please stop by my Gallery and YouTube Page for a visit. And read Trunkards! And check out my Heroes essays. 
July 9 2009, 12:33 AM  #25  
World Famous Starship Captain

Re: Tuesday Night Quiz!
__________________
"In Germany, fear comes before sex... and if you're lucky, then a little bit later, an elf."  Victoria Coren Mitchell "Everybody has a secret world inside of them..."  Neil Gaiman


July 9 2009, 12:37 AM  #26 
Idealistic Cynic and Canon Champion
Location: RJDiogenes of Boston

Re: Tuesday Night Quiz!
I just can't do Math.
__________________
Please stop by my Gallery and YouTube Page for a visit. And read Trunkards! And check out my Heroes essays. 
July 9 2009, 11:22 PM  #27 
on holiday
Location: England

Re: Tuesday Night Quiz!
Zion was the only one with the correct answer. ANSWERS: Cog A has 28 teeth; Cog B has 36 teeth; Cog C has 8 teeth. SOLUTION: As promised, an elegant solution to the puzzle. 1. Suppose the teeth counts are a, b and c. We know that b=a+c. So the tooth ratios are a : (a+c) : c 2. Now work out the turning ratios: If cog A does 1 revolution, cog B does a/b revolutions = a/(a+c) revolutions. Meanwhile cog C does a/c revolutions. So the turning ratios are 1 : a/(a+c) : a/c Now let us suppose that a,b,c are triply coprime. If we multiply the number of teeth on each cog by some positive integer k, that will not affect the mechanics since the turning ratios will remain the same. (eg, a/c = ka/kc) What this condition ensures is that there is no smaller set of cogs which solves the problem. I will continue to count the teeth as a,b,c, although a,b,c are now triply coprime. I allow myself to scale a solution up by some positive integer k, without loss of generality. 3. Scale up the turning ratios by (a+c).c to eliminate the denominators in the turning ratios. c.(a+c) : a.c : a.(a+c) Of course, the cogs can do any multiple of these turnings and end up back in their original configuration. But it is implied in the question, that these are the least such numbers, so the numbers of turnings must have no common factor (otherwise we could divide by that factor and find a solution with less turnings). So let m be the highest common factor of these three numbers: m=hcf{ a.(a+c), a.c, c.(a+c) }. Since we assumed that a,(a+c),c are triply coprime, it clearly follows that m must be equal to unity. Now let's move from ratios to actual numbers of turnings. So, the number of turns made by cog A is c.(a+c) the number of turns made by cog B is a.c the number of turns made by cog C is a.(a+c) We have now ensured that this will create a solution with a minimal number of turnings as long as a,(a+c),c are triply coprime. 4. We are told that cog C rotates 45 times more than cog A. So c.(a+c) + 45 = a.(a+c) Rearranging gives: (a+c).(ac) = 45 If we know what (a+c) and (ac) are, then we can work out what a and c are. Basic simultaneous equations there. a = [(a+c) + (ac)] / 2 and c = [(a+c)  (ac)] / 2 5. The prime factorisation of 45 is 3*3*5. Consider how these factors are shared between (ac) and (a+c), and what that means for a and c. There are only three ways of doing this: (a+c)*(ac) ... a , c ... b=a+c 45 * 1 ... a=23, c=22 ... b=45 15 * 3 ... a=9, c=6 ... b=15 9 * 5 ... a=7, c=2, ... b=9 45*1  The first of these gives too big result for b. Since b can be no bigger than 40. We can only scale up by k, not down, so this is no good. Were it not for that limiting condition this would have been a valid solution. 15*3  In the second case, a,b,c are not coprime, but have a common factor of 3. We are relying on them being coprime. So this is no good. [This means that as C makes 45 turns more than cog A, the starting configuration will be met thrice, not once.] 9*5  In the third case, the figures are coprime, however, the figures are too small for the bounds. We can scale up as provision was given to do this. Cog C is the smallest and needs to be at least 4 times bigger to give the minimum 8 teeth. Scaling up by 4 gives a=28, b=36, c=8. This is now a valid solution. Are there other solutions? Scaling up by 5 or more would give b at least 45. This is too big, so there are no other solutions. Q.E.D.
__________________
. 
July 9 2009, 11:25 PM  #28 
Commodore

Re: Tuesday Night Quiz!

July 9 2009, 11:34 PM  #29 
World Famous Starship Captain

Re: Tuesday Night Quiz!
__________________
"In Germany, fear comes before sex... and if you're lucky, then a little bit later, an elf."  Victoria Coren Mitchell "Everybody has a secret world inside of them..."  Neil Gaiman

July 10 2009, 12:42 AM  #30 
Idealistic Cynic and Canon Champion
Location: RJDiogenes of Boston

Re: Tuesday Night Quiz!
Well, anyway, I was close. My answer had three numbers. But now my brain won't stop hurting.
__________________
Please stop by my Gallery and YouTube Page for a visit. And read Trunkards! And check out my Heroes essays. 
Bookmarks 
Tags 
quiz 
«
Previous Thread

Next Thread
»
Thread Tools  


All times are GMT +1. The time now is 01:43 PM.
Powered by vBulletin® Version 3.8.6
Copyright ©2000  2015, Jelsoft Enterprises Ltd.
FireFox 2+ or Internet Explorer 7+ highly recommended.
Copyright ©2000  2015, Jelsoft Enterprises Ltd.
FireFox 2+ or Internet Explorer 7+ highly recommended.