The Trek BBS

The Trek BBS (http://www.trekbbs.com/index.php)
-   Fan Art (http://www.trekbbs.com/forumdisplay.php?f=21)
-   -   Kitbash Datasheets - some finished ones (http://www.trekbbs.com/showthread.php?t=229915)

Forbin November 2 2013 03:37 AM

Kitbash Datasheets - some finished ones
 
Following on from the kitbas orthos thread, I've managed to finish a selection of new ones. links, 'cause I made them 2200 pixels wide so you can actually read them. :)

http://www.inpayne.com/portfolio/bucephalussheet.jpg
http://www.inpayne.com/portfolio/ascendersheet.jpg
http://www.inpayne.com/portfolio/columbussheet.jpg
http://www.inpayne.com/portfolio/soryusheet.jpg
http://www.inpayne.com/portfolio/themistoclessheet.jpg
http://www.inpayne.com/portfolio/minmussheet.jpg
http://www.inpayne.com/portfolio/chaffeesheet.jpg
http://www.inpayne.com/portfolio/terrellsheet.jpg
http://www.inpayne.com/portfolio/sultanasheet.jpg
http://www.inpayne.com/portfolio/masaosheet.jpg
http://www.inpayne.com/portfolio/kirovsheet.jpg
http://www.inpayne.com/portfolio/dominionsheet.jpg
http://www.inpayne.com/portfolio/alacritysheet.jpg

Whew! Lots more to go.

Kaiser November 2 2013 06:54 AM

Re: Kitbash Datasheets - some finished ones
 
so much awesomeness! :D

Thank you :)

Klaus November 2 2013 07:09 AM

Re: Kitbash Datasheets - some finished ones
 
:eek:

sojourner November 2 2013 07:56 AM

Re: Kitbash Datasheets - some finished ones
 
Those are great! And you got my fav, the Terrell!

Captain Shade November 2 2013 10:26 AM

Re: Kitbash Datasheets - some finished ones
 
Absolutely wonderful...Even if you made the orthos I did, of some of them, look like chicken scratch. ;)
http://www.trekbbs.com/data:image/gi...EBkoIECg+qgQA7http://www.trekbbs.com/data:image/gi...EBkoIECg+qgQA7

danellis November 2 2013 11:02 AM

Re: Kitbash Datasheets - some finished ones
 
Great work Forbin. I love that you went to the lengths of crew patches and ship logos for so many of them.

My favourite design's probably the Columbus in the way it prefigures later fashions in starship design (a style that particularly suits the Excelsior class BTW).

Do you have an aft-view of the Dominion? I couldn't figure out how the third nacelle attaches? (sorry if this has been covered in your orthos thread, or elsewhere).

dJE

Bernard Guignard November 2 2013 12:53 PM

Re: Kitbash Datasheets - some finished ones
 
Forbin that is fantastic work :techman: these are screaming to be printed out in 11 x 17 :)

Forbin November 2 2013 03:01 PM

Re: Kitbash Datasheets - some finished ones
 
Quote:

danellis wrote: (Post 8840188)

Do you have an aft-view of the Dominion? I couldn't figure out how the third nacelle attaches? (sorry if this has been covered in your orthos thread, or elsewhere).

dJE

Damn, didn't think of that. It's just on a pylon sticking straight up from the "manifold" hump. Maybe if we have some down time at work this week...

Quote:

Bernard Guignard wrote: (Post 8840317)
Forbin that is fantastic work :techman: these are screaming to be printed out in 11 x 17 :)

It's hard to tell from the raster conversions, but most of them are proportioned for A2 and/or engineering C-cize (17x22). I started using those sizes when I had an Epson 1520 printer at home, which prints those sizes. Then it died, and the new models cost a freakin thousand dollars! Geez!!

Forbin November 3 2013 03:45 AM

Re: Kitbash Datasheets - some finished ones
 
What the hell, I made a page:
http://www.inpayne.com/portfolio/datasheets.html
:)

Kaiser November 3 2013 04:28 AM

Re: Kitbash Datasheets - some finished ones
 
awesome page :)

Bernard Guignard November 3 2013 02:36 PM

Re: Kitbash Datasheets - some finished ones
 
Quote:

Forbin wrote: (Post 8840557)
Quote:

danellis wrote: (Post 8840188)

Do you have an aft-view of the Dominion? I couldn't figure out how the third nacelle attaches? (sorry if this has been covered in your orthos thread, or elsewhere).

dJE

Damn, didn't think of that. It's just on a pylon sticking straight up from the "manifold" hump. Maybe if we have some down time at work this week...

Quote:

Bernard Guignard wrote: (Post 8840317)
Forbin that is fantastic work :techman: these are screaming to be printed out in 11 x 17 :)

It's hard to tell from the raster conversions, but most of them are proportioned for A2 and/or engineering C-cize (17x22). I started using those sizes when I had an Epson 1520 printer at home, which prints those sizes. Then it died, and the new models cost a freakin thousand dollars! Geez!!

Thanks that is good to know biggest size my Hp can do do is 13 x 19 but that is not a common size sheet. I need to get a
a second hand plotter to plot out some of this material. :)

for now I'll just have to enjoy them on the screen ;)

Forbin November 21 2013 05:23 PM

Re: Kitbash Datasheets - some finished ones
 
There's always Hope!
http://www.inpayne.com/portfolio/hopesheet.jpg

The Model:
http://www.inpayne.com/models/kitbas...page_hope.html

Based on the idea of whacking a hospital ship together by sticking a saucer and engines on a standard medical pod, which was designed originally to be carried by a tug. I originally came up with this by jamming GameScience miniatures together in the 70s.

Kaiser November 22 2013 12:02 AM

Re: Kitbash Datasheets - some finished ones
 
Best Medical Ship ever for the TOS era there :)

Forbin November 22 2013 12:13 AM

Re: Kitbash Datasheets - some finished ones
 
Really? Not too clunky? I was going for the thrown-together prototype look. I know cargo pods aren't the sexiest shape in the fleet. :lol:

Kaiser November 22 2013 04:08 AM

Re: Kitbash Datasheets - some finished ones
 
not too clunky at all and with all the space and volume in that cargo pod you could treat alot of people or animals in them :)

my only crit is always hate undergunned transports and medical vessels just seems to me a bad idea to have them under gunned


All times are GMT +1. The time now is 10:02 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
FireFox 2+ or Internet Explorer 7+ highly recommended.