The Trek BBS

The Trek BBS (http://www.trekbbs.com/index.php)
-   Star Trek - Original Series (http://www.trekbbs.com/forumdisplay.php?f=38)
-   -   Engineering's curved hallways (http://www.trekbbs.com/showthread.php?t=160969)

jayrath February 9 2012 01:38 AM

Engineering's curved hallways
 
So many get bent out of shape over this, so let's examine it and see if we can put it to rest.

Everyone knows that engineering is "downstairs," somewhere in the secondary hull, right? We hear that in dialogue. And yet we often see that the hallway leading to it is curved. So it must be in the round primary hull. Or maybe it's a second engineering section in the primary hull. Maybe it's a duplicate engineering room. Maybe it's for impulse. Maybe -- and so on. You see this in many other threads.

I think this is all limited thinking. I prefer to think that starship designers merely like curved hallways, all over the Connies. The primary hull's hallways could as easily have been laid out as a grid. Instead, they're curved. So, too, are many of our contemporary suburban streets; instead of running straight, they often curve and meander.

Think about it. Let's say you live in a spacegoing community of 400. A curved hallway gives you a tiny sense of community, of neighborhood. Otherwise, you've got an endless hall, and anyone down at the other end can see you in your space jammies when you run across to see your neighbor or use the lavatory.

So I say that that the secondary hull must be filled with curved hallways. No problem!

MarsWeeps February 9 2012 01:45 AM

Re: Engineering's curved hallways
 
Quote:

jayrath wrote: (Post 5782120)
So many get bent out of shape over this,

Funny, you're the first person I've ever heard mention it! :)

JB2005 February 9 2012 01:49 AM

Re: Engineering's curved hallways
 
Quote:

MarsWeeps wrote: (Post 5782174)
Quote:

jayrath wrote: (Post 5782120)
So many get bent out of shape over this,

Funny, you're the first person I've ever heard mention it! :)


To be fair, Jayrath has been here over a decade ;)

I'm guessing that the entire ship has curved hallways because wiring and so forth is hidden in the curves?

MarsWeeps February 9 2012 01:56 AM

Re: Engineering's curved hallways
 
Quote:

JB2005 wrote: (Post 5782192)
To be fair, Jayrath has been here over a decade ;)

So where are all the posts that he is referring to? Has it been mentioned recently?

Maybe some of the hallways are curved around the warp core, wherever that is.

jayrath February 9 2012 02:03 AM

Re: Engineering's curved hallways
 
Forgive me for not being able to search the other threads and offer citations. Anway, the original problem remains. Why are the engineering hallways curved? My guess is that it was for aesthetic reasons.

Mysterion February 9 2012 03:01 AM

Re: Engineering's curved hallways
 
I've just written off to them only having the one corridor set and gotten on with my life. Of course engineering is in the secondary hull.

Captain Tracy February 9 2012 06:08 AM

Re: Engineering's curved hallways
 
Quote:

jayrath wrote: (Post 5782120)
Think about it. Let's say you live in a spacegoing community of 400. A curved hallway gives you a tiny sense of community, of neighborhood. Otherwise, you've got an endless hall, and anyone down at the other end can see you in your space jammies when you run across to see your neighbor or use the lavatory.

JAYRATH - I think this part of your post is a brilliant observation, and in reality would be - in my opinion - an absolutely critical design element psychologically.

I personally can't imagine being able to 'keep it together' at all, if I was asked to live aboard a Starship; with the knowledge there is no way off until the ship docks at a Space Station, or you happen to draw Shore-Leave liberty or a landing party detail ( a party which you do NOT want to wear Red),... no way! I would eventually freak out - I can no longer do the flight to Hawaii, and Australia & Japan are TOTALLY out of the question,... even what used to be 'routine' trips from NYC to LAX are getting 'dicey' for me these days.

SO,.. if a Starship designer was intending to put people in an encapsulated environment for possibly months at a time,... something like CURVED HALLWAYS would be essential for all the reason you so brilliantly pointed out.

Endless straight hallways,... as far as the eye can see,... trapped on-board,... no ability to 'get off at the next corner',... can't breathe,... panic-attack immanent !!!

So, I am not one to 'argue' where a wholly fictional engineering section is supposed to located on a wholly fictional Starship; being in a reality an ever-changing TV studio set ,...

HOWEVER, I would ask those 'in-the-know' to address this question:

If the primary engineering section is 'supposed to be' located in the secondary hull section, why then - from the perspective of the typical TV viewer - does the rear wall section of the 'engine room' only seem to logically line-up with and match the exterior of the impulse engine located just aft of the main Saucer-section?

http://t0.gstatic.com/images?q=tbn:A...yLRNrtCt8JwX-whttp://t2.gstatic.com/images?q=tbn:A...VgQvGryKO3Yl9_

Perhaps this is where the 'debate' comes from?

Timo February 9 2012 07:13 AM

Re: Engineering's curved hallways
 
I don't really see any sort of a match there... Engineering has this long triangular tunnel that may or may not narrow down towards the end (the forced perspective doesn't work all that well because of all the camera angles used). But if the tunnel is supposed to match the highest part of that fancy exterior structure, then we fail to see Engineering itself jut out from the top of the saucer - and it the lower part, then from the undercut bottom! That is, unless the ship is actually somewhat bigger than we thought. But if anything, it was originally designed to be smaller than it ended up being...

Curved hallways may go round large pieces of equipment. Or then they may actually be straight and we only mistake them for curved in the two episodes featuring them, the same way we mistake all the curved hallways in the saucer for having the exact same degree of curvature even when they obviously have to represent a number of different curvatures and radii. :vulcan:

Timo Saloniemi

scotpens February 9 2012 09:40 AM

Re: Engineering's curved hallways
 
Quote:

Captain Tracy wrote: (Post 5783542)
SO,.. if a Starship designer was intending to put people in an encapsulated environment for possibly months at a time,... something like CURVED HALLWAYS would be essential for all the reason you so brilliantly pointed out.

Endless straight hallways,... as far as the eye can see,... trapped on-board,... no ability to 'get off at the next corner',... can't breathe,... panic-attack imminent !!!

Submarine crews in today’s navies may remain underwater, isolated from the rest of humanity, for weeks or even months at a time. The interior arrangements of nuclear subs are designed for practicality and maximum use of available space. Curved corridors in a cigar-shaped outer hull would be tremendously wasteful of space.

Anyone who’s prone to claustrophobia or panic attacks in such an environment has no business serving on a submarine — or a starship.

The Enterprise had curved corridors leading to the Engineering section because of the layout of the sets on Desilu’s Stage 9.

Damn that reality, screwing with our heads again!

Tiberius February 9 2012 09:50 AM

Re: Engineering's curved hallways
 
Engineering is in the engineering section, so said Matt Jefferies.

Captain Tracy February 9 2012 09:52 AM

Re: Engineering's curved hallways
 
Quote:

scotpens wrote: (Post 5784331)
Submarine crews in today’s navies may remain underwater, isolated from the rest of humanity, for weeks or even months at a time.


STOP!!!!!!!
My chest is tighter than an alter-boy's arse before confession with Father Flannigan!!!!!

Air,.. I need AIR!!!! Must get outside!!!!!! :crazy:

LOL!

The Castellan February 9 2012 02:17 PM

Re: Engineering's curved hallways
 
Quote:

scotpens wrote: (Post 5784331)
Quote:

Captain Tracy wrote: (Post 5783542)
SO,.. if a Starship designer was intending to put people in an encapsulated environment for possibly months at a time,... something like CURVED HALLWAYS would be essential for all the reason you so brilliantly pointed out.

Endless straight hallways,... as far as the eye can see,... trapped on-board,... no ability to 'get off at the next corner',... can't breathe,... panic-attack imminent !!!

Submarine crews in today’s navies may remain underwater, isolated from the rest of humanity, for weeks or even months at a time. The interior arrangements of nuclear subs are designed for practicality and maximum use of available space. Curved corridors in a cigar-shaped outer hull would be tremendously wasteful of space.

Anyone who’s prone to claustrophobia or panic attacks in such an environment has no business serving on a submarine — or a starship.

The Enterprise had curved corridors leading to the Engineering section because of the layout of the sets on Desilu’s Stage 9.

Damn that reality, screwing with our heads again!

Well, I would suggest stop comparing life on a Starfleet ship to today's military vessels. the life styles are like bananas to pineapples.

Timo February 9 2012 03:25 PM

Re: Engineering's curved hallways
 
Indeed, the average submarine for a long time has featured (pseudo-)wooden paneling for purely psychological reasons. If one could, one would build corridors that look like forest paths (only without the puddles and the mosquitoes) - but that sort of luxury still doesn't come cheap in the TOS era. The best they can do is onboard gardens, featured in several episodes.

Timo Saloniemi

Mytran February 9 2012 04:17 PM

Re: Engineering's curved hallways
 
The issue of why Engineering's corridor's are curved tends to crop up in threads that deal with the mapping out of the interior of the Enterprise. The most recent example might be in BLSDWLF's thread, but it also got mentioned in CARY L BROWN's plans, and SHAW's (as far as I remember, anyway. It has been a while since I read them!)

Timo February 9 2012 04:27 PM

Re: Engineering's curved hallways
 
...Suffice to say, the curved corridor set can be made to fit transversely within the engineering hull, at the popular estimates on the ship's dimensions. It's just a matter of whether one would want to.

Timo Saloniemi


All times are GMT +1. The time now is 05:50 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
FireFox 2+ or Internet Explorer 7+ highly recommended.